Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Summary of Contents for NORIS VD61
- Page 1 Instruction Manual VD61 NAN-KD-0031-EN_V01.01 | 05/05/2021...
- Page 2 | Issue NORIS Automation GmbH Issue Information on issue Document ID NAN-KD-0031-EN Issue V01.01 Date April 2021 Instruction Manual VD61 2 / 23...
-
Page 3: Table Of Contents
Use of safety and warning notes Scope of delivery Accessories and spare parts Product description Safety notes Scope of application Measuring principle Type code Technical data Installation and commissioning Tools and equipment Dimensions Installation Electrical connection Maintenance De-installation and disposal Troubleshooting Service Instruction Manual VD61... -
Page 4: General Information
Modification of products NORIS shall accept no liability whatsoever if unauthorised modifications have been made to the products. This will also invalidate the warranty. Therefore, consult our technical staff before undertaking any modifications. Instruction Manual VD61 4 / 23... - Page 5 Nevertheless, variations cannot be completely ruled out. NORIS therefore cannot guarantee complete agree- ment of the documentation contents with the hardware and software. Changes and corrections will be included in subsequent issues of the tech- nical documentation. Instruction Manual VD61 5 / 23...
-
Page 6: General Information On This Instruction Manual
Subject of the instruction manual The subject of this instruction manual is the installation, commissioning, operation and maintenance of pressure transmitter series VD61. Further- more, this instruction manual also contains important troubleshooting infor- mation. Use of safety and warning notes... -
Page 7: Scope Of Delivery
NORIS Automation GmbH General information on this instruction manual | 2 Scope of delivery Pressure transmitters type series VD61 are delivered without accessories. Accessories have to be ordered separately. Accessories and spare parts Available accessories Adapter with G½ male Attenuator with G½ male thread thread Pos. -
Page 8: Product Description
Otherwise serious injuries may occur and the transmitter can be damaged. Take precautions with regard to remaining media in removed pressure transmitter. CAUTION Remaining media in the pressure port may be hazardous or toxic! Instruction Manual VD61 8 / 23... -
Page 9: Scope Of Application
NORIS Automation GmbH Product description | 3 Scope of application Series VD61 pressure transmitters are mainly used in: Shipbuilding indus- try, transport technology, machinery and equipment. They measure the pressure of liquid or gaseous media. Caution: An unsuitable pressure medium can damage or even... -
Page 10: Technical Data
Permissible measured medium temperature: -30 ... +100 °C Permissible ambient temperature: -30 ... +100 °C Storage temperature -30 ... +100 °C Vibration resistance IEC 60068-2-6: 10 g (resonance) Shock resistance IEC 60068-2-27: 500 g (mechanical) Protection class IP64 according to EN 60529 Instruction Manual VD61 10 / 23... - Page 11 Approx. 560 g Other Approvals CE Conformity Pressure Equipment Directive 97/23/EC; EMC Directive 2004/108/EC EN 61326 Emission (Group 1, Class B) and interference immunity (industrial environment) Measuring range VD61 Code Measuring range Overload 0 ... 1 bar 2 bar 0 ... 1.6 bar 3.2 bar 0 ... 2.5 bar 5 bar 0 ...
- Page 12 4 | Technical data NORIS Automation GmbH Measuring range VD61 1,6M1 -1 ... 1.6 bar 5.2 bar 2,5M1 -1 ... 2.5 bar 7 bar -1 ... 3 bar 8 bar -1 ... 4 bar 10 bar Preferred types Features marked with a symbol at the end of the line are preferred fea- tures.
-
Page 13: Installation And Commissioning
Installation and commissioning | 5 Installation and commissioning Tools and equipment Have the following tools and equipment ready for commissioning: ▪ Open-ended spanner (spanner width 27) ▪ Screwdriver Make sure that the tools and equipment are in perfect working NOTICE order. Otherwise the pressure transmitter can be damaged. Instruction Manual VD61 13 / 23... -
Page 14: Dimensions
5 | Installation and commissioning NORIS Automation GmbH Dimensions Side view A) Cable gland M16 (cable Ø 5…10 B) Terminal for cable up to 1.5 mm C) 15 mm D) G1/4 female thread E) 146 mm Top view A) 40.5 mm B) 20 mm C) Ø 5.3 mm Front view A) 35 mm B) 78 mm C) WAF27 Instruction Manual VD61 14 / 23... - Page 15 NORIS Automation GmbH Installation and commissioning | 5 Adapter with G½ male Attenuator with G½ male thread thread A) 32 mm A) 32 mm B) 5 mm B) 5 mm C) Ø 6 mm C) Ø 6 mm D) G1/2 D) G1/2 E) WAF22 E) WAF22 F) Material 1.4435 F) Material 1.4435 Instruction Manual VD61 15 / 23...
-
Page 16: Installation
Type of screw and screw length depend on the mounting surface. Ensure that the pressure transmitter is bolted down tightly on NOTICE the surface. Otherwise the pressure transmitter and the pipe connection can be damaged. 1: VD61 opened with markings Follow the instructions to install the pressure connection Instruction Manual VD61 16 / 23... - Page 17 NORIS Automation GmbH Installation and commissioning | 5 2: VD61-10 pressure connection A. Connect the pressure connection appropriately to the pressure transmitter. ➩ Use an open-ended spanner to counter the screw connection. Therefore, use the nut of the pressure transmitter (see previ- ous fig) and not the transmitter housing. ➩ When screwing, do not cross the threads.
-
Page 18: Electrical Connection
2,000 m should the pressure transmitter be used at this altitude. ▪ Make sure that no moisture enters the cable end. VD61 Connection diagram Follow the instructions to connect the cable to the pressure transmit- A. Loosen the two screws (see next fig., Pos. A). B. Open carefully the covering (see next fig., Pos. B) C. Loosen the cable gland (see next fig., Pos. C) and insert the cable through the cable gland. - Page 19 This may lead to incorrect measurement, signal loss or may even damage the transmitter. F. Screw the covering onto the housing by using both screws. G. Fix the cable gland and check whether the cable is tightly fixed. 3: VD61 opened with markings Instruction Manual VD61 19 / 23...
-
Page 20: Maintenance
CAUTION! Residual media in dismounted devices could harm people and environment. ▪ Take sufficient precautionary measures. ▪ NOTICE! Do not use any pointed or hard objects for cleaning, as they may damage the diaphragm of the process connection. Instruction Manual VD61 20 / 23... -
Page 21: De-Installation And Disposal
Electric devices must not be disposed together with normal waste. Dis- pose the transmitters in accordance with local requirements for elec- tronic equipment. Note that you have to clean the transmitter, if it was used in applications with harmful media before (see Section "Mainte- nance 20]"). In this case all activities should also comply with the lo- cal requirements of poisonous and dangerous substances. Instruction Manual VD61 21 / 23... -
Page 22: Troubleshooting
In this case, contact the manufacturer. Instruction Manual VD61 22 / 23... -
Page 23: Service
Fax: +49 911 3201 150 Fax: + 49 381 519944-4 Email: info@noris-group.com Email: info@noris-automation.de Web: www.noris-group.com Web: www.noris-group.com NORIS Benelux B.V. NORIS Automation Far East Pte. Nieuwland Parc 10L Ltd. 2952DA Alblasserdam No. 42 Toh Guan Road East Netherlands #01-80 Enterprise Hub...