Installation
A
B
C
D
2
1
OFF
230V~
50 Hz
OFF
Install the unit in a suitable position to
correctly detect the temperature, possibly
in an internal wall, avoiding installation
in niches, behind doors, curtains or near
heat sources.
Press the button ❶ and separate the base
❷ from the device body B.
Remove the protective shell from the
terminal block C.
Secure the base to the recessed box,
passing the connection wires through the
designated opening D.
N.B. Do not tighten the fixing screws too
much.
The device can be wall-hung even without
a recess-mounting box, by using the sup-
plied wall-plugs.