Hours of activity counter
The screen in figure E shows the de-
vice's hours of activity.
To reset the counter to zero, press and
hold for a long time in the area highlighted
in the figure.
Press the
E
next parameter to be configured.
Firmware version
The screen in figure F shows the
version number of the firmware installed
on the device.
Press the
next parameter to be configured.
F
Replacing the batteries
(only on battery-powered model)
The flashing
G indicates that the batteries must be
replaced within about 1 month.
Note: To save the remaining energy, the
display's backlighting is deactivated.
G
The icons
the batteries are not sufficiently charged
to manage the thermal zone, which is
therefore excluded from control H.
WARNING. Failure to replace the batteries
in time may cause damage to the heating
system (frost protection is no longer
guaranteed).
H
button to move on to the
button to move on to the
icon on the display
and
indicate that