ARB BASE RACK 1780220 Fitting Instructions

Part Number:

Product Description:

 The ARB BASE RACK system has a maximum capacity of 25kg per cross slat. Exceeding this limit
may result in damage or failure
 This product must be installed exactly as per these instructions using only the hardware supplied
 Do not use this product for any product, other than those specified by ARB
 This product or its fixing must not be modified in any way
 These instructions are correct as at the publication date
 During installation, it is the duty of the installer to check correct operation/clearances of all
components
 Work safely at all times

Unless otherwise instructed, tighten fasteners to specified torque
 Fastener torques are to be checked at regular intervals
ARB 4x4 ACCESSORIES
42-44 Garden St
Kilsyth, Victoria
AUSTRALIA 3137
Australian enquiries
North & South American enquiries
Other international enquiries
KIT NUMBER
1780220
1780230
Last Rev Date: 06/11/2020
Copyright © 2005 by ARB Corporation Limited. All rights reserved, this document must not be reproduced without the express authority of ARB Corporation Ltd
1780220 & 1780230
BASE RACK T-Slot adapter (Single & Pair)

WARNING

Corporate Head Office
www.arb.com.au

PARTS LISTING

APPLICATION.
Tel: +61 (3) 9761 6622
Fax: +61 (3) 9761 6807
PART NO. QTY
6191060 1
6191075 1
6151256 2
6191060 2
6191075 2
6151256 4
Page 1 of 2
sales@arb.com.au
sales@arbusa.com
exports@arb.com.au
DESCRIPTION
EXTRUSION T-SLOT ADAPTER 100MM
EXTRUSION BASE ADAPTER M6
SCREW BHD M6x16 SS
EXTRUSION T-SLOT ADAPTER 100MM
EXTRUSION BASE ADAPTER M6
SCREW BHD M6x16 SS
Fitting instructions# 3789983