It’s a safe, supportive multipurporse seat, great for your home or on the go. Please read all user instructions carefully before using the GoTo Seat. These instructions can also be downloaded from our website www. fireflyfriends.come along with videos, diagrams and other useful downloads.
It also can be used stand alone with the parent/ guardian to shop with an attachment to a floor sitter device. greater ease. The GoTo Seat is not designed to be used as a substitute for a child’s car 3. As a Floorsitter with the seat.
GoTo Seat User Manual SECTION 02: Certification The GoTo Seat is classified as a Class I Medical Device under EU and UK regulations. As the manufacturer, James Leckey Design Limited, declares that this product conforms to the Medical Device Regulation (2017/745), UK Medical...
Page 5
GoTo Seat User Manual p5 • Ensure sufficient clearance of any wear the fabric components straps from the user’s neck, during and encourage corrosion on the use of the product and transfers, product. Only use non-abrasive to avoid any strangulation risk.
9. The GoTo Seat contains parts attaching GoTo Seat. which could present a choking or tightening hazard to small children. 4. Always ensure the GoTo Seat is firmly Check all components are securely in secured before use and the straps place and securely fastened before are tight.
SECTION 06: Medical Device Combinations It may be possible to combine the GoTo Seat with one or more other Medical Device or other product. Information on which combinations are possible can be found at leckey.com. All combinations listed have been validated to meet the General Safety and Performance Requirements, section 14.1 of the Medical Device...
GoTo Seat User Manual Section 07: Precautions and Contraindictions Precautions: Contraindictions: • Fixed spinal deformities such as There are no contraindications scoliosis or kyphosis associated with the use of the GoTo Seat. • Severe muscle contractures All precautions and contraindications •...
Store these in a safe removed.Please allow the product to air dry, ensuring all alcohol is place and out of reach of children. evaporated before use. For GoTo Seat Vinyl Cleaning and Care Information please refer to page 30.
Page 10
GoTo Seat User Manual Floorsitter base unit 11. Do not put the upholstery on to the plastic base whilst the cover 1. Ensure the bottom of the floorsitter is still wet. Dry thoroughly prior base unit is cleaned after every use.
SECTION 10: be adjusted by accessing the adjustment fitting underneath the Important guidelines padded cover. In the GoTo Seat Size 2 the location of the groin strap can be moved outwards to provide more Placing of child into GoTo Seat room for your child as they grow.
SECTION 11: Product 5. Ensure all knobs are tightened securely. Inspection 6. Ensure GoTo Seat is secure on base before positioning child in GoTo Seat. We recommend that various checks 7. If you are using the floorsitter, of the equipment are carried out...
If in any Firefly Products doubt about the continued safe use of your Firefly by Leckey product or if any parts should fail, please cease using Before re-issuing a product, it is the product and contact our customer...
GoTo Seat User Manual SECTION 13: Setting up your GoTo Seat 13(a) Aligning the lateral support Your GoTo Seat will arrive like this, with the lateral support aligned to the body. Loosen the knob just enough so that you can rotate the Turn your GoTo Seat over and clip lateral support.
Page 15
GoTo Seat User Manual p15 13(b) Setting up the Floorsitter (if purchased with GoTo Seat) The floorsitter should always be placed on a firm, solid, static surface. When placing the floorsitter on your chosen surface, it’s vital that all rubber feet are in contact with the surface.
GoTo Seat User Manual SECTION 14: Using the GoTo Seat on a hardback chair 14(a) Attaching GoTo Seat to a hardback chair Make sure all straps are loose and not fastened to each other. Place GoTo Seat to the hardback chair.
Page 17
GoTo Seat User Manual p17 Pull straps outwards Tidy excess straps into to tighten. loops and secure into clips. Ensure all black straps are securely fastened to the hard back seat and the five-point buckle at the front is unfastened before placing the child...
Page 18
Once fastened, adjust the shoulder straps, lateral support straps and groin strap by pulling the straps to tighten. Make sure the In Size 2 GoTo Seat the groin straps are not strap mounting location can be twisted when the moved backwards or forwards buckle is closed.
Page 19
Once you have the headrest at your desired height, screw the knob back in to the GoTo Seat base by turning clockwise. Detach the lateral support by turning the knob anti-clockwise.
GoTo Seat User Manual SECTION 15: Using the GoTo Seat on a supermarket trolley Ensure all straps are loose and unfastened. Place GoTo Seat in to trolley seat. Thread straps through the grid of the trolley seat and fasten. Pull straps to tighten straps.
GoTo Seat User Manual p21 SECTION 16: Attaching the GoTo Seat to the floorsitter accessory Before attaching the GoTo Seat to the floorsitter accessory, follow steps in section 13(b). Lower GoTo Seat with the seat base flat onto the floorsitter.
Page 22
GoTo Seat User Manual SECTION 16: Attaching the GoTo Seat to the floorsitter accessory (continued) Before attaching the recline arm to the backrest, ensure Listen for audible click that it is at the highest setting. when engaging both seat base and seat With one hand on GoTo Seat, back to the floorsitter.
Mid recline position – we recommend that GoTo Seat is placed into a mid recline position if your child is being lifted into the seat.
Page 24
You should aim to make this movement as smooth as possible to reduce any anxiety the child may have. To bring GoTo Seat in to a more upright position, place one hand onto the GoTo Seat at the top of the backrest for...
Page 25
GoTo Seat User Manual p25 17(b) Removing GoTo Seat from floorsitter To release GoTo Seat from the floorsitter, press the green button on the recline arm and pull the back rest forward. To release the seat base, pull on the green plastic tab and slide backwards, then lift GoTo Seat off the floorsitter.
GoTo Seat User Manual SECTION 18: Taking GoTo Seat apart and removing upholstery 18(a) Headrest Unscrew the knob at the headrest anti-clockwise to remove the headrest from the GoTo Seat base. Screw the knob into the back of the headrest to ensure safe keeping.
Page 27
GoTo Seat User Manual p27 18(b) Lateral Support Start with all the straps connected to the buckle as shown. Turn the GoTo Seat over and detach the lateral support by turning the knob anti-clockwise. Slide the lateral support up and over the GoTo Seat backrest.
Page 28
GoTo Seat User Manual 18(c) Straps Lay the GoTo Seat base face-down and unbutton the upholstery. Remove straps from the GoTo Seat pad by threading the buckles through the holes of the upholstery and plastic base. Connect the straps...
Page 29
GoTo Seat User Manual p29 18(d) Upholstery Remove the insert from the upholstery. For the GoTo Seat Size 1, undo the Velcro at the seat base to remove the insert.
GoTo Seat User Manual SECTION 19: Putting the upholstery back on and assembling GoTo Seat 19(a) Straps & Upholstery Retrieve the straps for the GoTo Seat insert, with straps at the rear of the GoTo Seat base and straps (the longest straps) at the seat pad.
Page 31
GoTo Seat User Manual p31 19(b) Lateral Support Before starting, plan which lateral support strap needs to be attached to which side of the upholstery in order for the buckle to fasten. Loosen the lateral support straps on the central buckle as much as possible.
Page 32
GoTo Seat User Manual 19(c) Headrest Insert shoulder strap buckle straight through the front of the headrest insert and secure at the back. Slide headrest insert into its upholstery and fasten poppers. Attach headrest to GoTo Seat base by aligning screw hole with its gap.
Max (mm/inches) Lateral support width 190/7.5 210/8 Min (mm/inches) Seat Depth 157/7 244/9.5 (mm/inches) Max Weight 15/33* 30/66* (kg/lbs) Age Range 1-3 years 3-8 years (approx) *(if child is above 13kg/28.5lbs GoTo Seat cannot be used in a shopping trolley)
GoTo Seat User Manual SECTION 21: TABLE OF SYMBOLS Symbol Meaning Medical Device Read the Instructions for Use CE mark Warning Manufacturer Serial number Product Code Max occupancy weight Date of Manufacture Latex free Unique Device Identification Machine wash- water temperature 40°C...
Page 35
GoTo Seat User Manual p35 Seat Seat Cleaning and Care Information • Wipe clean routinely with a microfibre cloth, lightly dampened with cold water only. Then dry with a clean absorbent cloth. • Soak up spillages as soon as possible with an absorbent dry cloth to prevent staining.
Need help?
Do you have a question about the GoTo Seat and is the answer not in the manual?
Questions and answers