Panasonic EY37C5 Operating Instructions Manual page 14

IV-2. USB power output
This unit can be used for charging
USB devices such as
smartphones.
NOTE:
• Power supply to connected
devices only. (Rating DC 5 V,
total two sockets 2 A)
• Do not connect devices with a
rating of 5 V and 2 sockets
exceeding 2 A in total to this
unit. It may cause damage.
• Depending on the USB device
or USB cable, charging may not
be possible.
• Some devices may prohibit
other than the specifi ed charging
methods.
• The total output current of the 2
sockets is 2 A. Depending on
the combination of devices when
charging two units
simultaneously, the charging
time may be longer than usual,
or in rare cases the two units
may not be charged
simultaneously.
• Charging may not be possible
depending on the USB device
and/or USB cable.
1. Remove the USB sockets
cover (E) and connect a
commercially available USB
cable. [Fig.7 ]
2. Press the USB power output
button (I) and start power
supply.
3. After use, press the USB
power output button (I) to turn
off power supply.
NOTE:
• The auto-OFF function
automatically turns USB
EN
power delivery off after
approximately 6 hrs. from
the time the button is
pressed if it remains turned
on.
4. Attach the socket cover (E).
IV-3. Battery level
indication function
• When you press the USB power
output button (I), the battery
indication lamp will be displayed
in 3 levels.
• Battery indication lamp (G)
always lights and displays
during USB power supply.
Indicator
Flashing
- 14 -
Battery status
Charged enough.
Approx. 50%
remaining.
Battery level is low.
The battery pack will
need to be charged
soon.
Empty.
The battery pack
needs to be charged.