Download Print this page

BIG FURNITURE WAREHOUSE Dorset KY001 Assembly Instruction Manual page 2

2 door wardrobe

Advertisement

ASSEMBLY
INSTRUCTION
1 - The table intended to for a maximum weight of 15kgs spread evenly the product.
Do not exceed this weight.
2 - Due to the size of this product we recommend that is assembled in the room intended for use.
3 - When you ready to start, make sure that you have the right tools, plenty of space and a clean, dry area for
assembly
4 - Unwrap all packaging materials and place the components on top of the carton box.
5 - Check the pack and make sure you have all the parts listed.
6 - Ensure that this product is fully assembled as illustrated before use.
7 - Check all screws or bolts are tightened and inspect regularly.
8 - This product should only be used on firm, level ground.
9 - Keep small parts out of reach of children.
10 - Make sure the legs remain in contact with the ground.
11 - Tools not included.
1 - DO NOT use power tools to construct this product.
2 - DO NOT tighten screw until fully assembled.
3 - DO NOT over tighten screw or bolts.
4 - DO NOT use this product if parts are missing, damage or worn.
5 - DO NOT stand or sit on this sideboard.
6 - DO NOT put directly onto the floor an this may cause scratching.
1 - Never use scourers, abrasives or chemical cleaners.
2 - To clean wipe with a sponge and warm soapy water. Do not use solvent based cleaners or detergents as they
can bleach or damage the product.
3 - Do not place hot items or liquids directly onto the surface. Always use suitable heat resistant mats
DESCRIPTION :
2 DOOR WARDROBE
2 OF 10
KY001

Advertisement

loading

This manual is also suitable for:

Dorset x-ky001Dorset x-ky001c