Advertisement
How to reset your C54AP(T) Access Point when there is no reset hole present.
See an example of the reset hole to see if it is present on your Access Point:
Example without reset hole.
Example with reset hole.
! Warning !
When resetting your Access Point you will loose all settings.
1. Unplug the Access Point from the power and from the network.
2. Place the Access Point upside down.
3. Unscrew both screws at the backside of the Access Point as you can see below.
Advertisement
Table of Contents
Related Manuals for Conceptronic C54AP
Summary of Contents for Conceptronic C54AP
- Page 1 How to reset your C54AP(T) Access Point when there is no reset hole present. See an example of the reset hole to see if it is present on your Access Point: Example without reset hole. Example with reset hole. ! Warning ! When resetting your Access Point you will loose all settings.
- Page 2 4. Place the Access Point back on its feet and open the cover a little as you can see below. 5. Connect the power supply. 6. Wait until the Access Point is on. 7. Press the little black reset button for a few seconds (until the Access Point will switch off, all 3 lights will close) 8.
Need help?
Do you have a question about the C54AP and is the answer not in the manual?
Questions and answers