AEG L8FBC69ASCA User Manual page 38

38 www.aeg.com
E.g. the washing or pre wash phase is
running:
When the phase ends the relevant
indicator stops flashing and is steady on.
The next phase indicator starts flashing.
E.g. the rinse phase is running:
If you select the Pára plus the steam
phase indicators come on.
The steam phase is running:
The anti-crease phase is running:
.
11.9 Interrupting a
programme and changing the
options
When the programme is running, you
can change only some options:
1. Touch the Start/Pauza button.
The related indicator flashes.
2. Change the options. The given
information in the display changes
accordingly.
3. Touch the Start/Pauza button again.
The washing programme continues.
11.10 Cancelling a running
programme
1. Press the Zap./Vyp. button to cancel
the programme and to deactivate the
appliance.
2. Press the Zap./Vyp. button again to
activate the appliance.
Now, you can set a new washing
programme.
.
.
If the ProSense phase is
already carried out and the
water filling is already
started, the new programme
starts without repeating the
ProSense phase. The water
and the detergent are not
drained out in order to avoid
waste. The display shows
.
the maximum duration of the
programme, updating it
about 20 minutes after the
starting of the new
programme.
11.11 Opening the door -
Adding garments
While a programme or the delay start
operates, the appliance door is locked.
If the temperature and level
of the water in the drum are
too high and/or the drum still
rotates you cannot open the
door.
1. Touch the Start/Pauza button.
In the display the related door lock
indicator goes off.
2. Open the appliance door. If
necessary, add or remove the items.
3. Close the door and touch the Start/
Pauza button.
The programme or the delay start
continues.
4. The door can be opened when the
programme is complete. You may
also set a spinning or draining
programme/option and than press
Start/Pauza button. If the spin and
drain programmes are not available
in the programme dial, they can be
set via App.
11.12 End of the programme
When the programme has finished, the
appliance stops automatically. The
acoustic signals operate (if they are
active).