decina FREESTANDING SPA BATH Installation & Owners Manual

F R E E S T A N D I N G S P A B A T H I N S T A L L A T I O N & O W N E R G U I D E
Manufactured from premium sanitary grade acrylic, Decina's freestanding spa baths are easy to install, with adjustable self-supporting feet &
can be freely located anywhere in your bathroom. This manual provides the correct steps & care advice for a safe & long lasting installation.
READ CAREFULLY
PRIOR TO COMMENCING
INSTALLATION...

PRE-INSTALLATION CHECKS

Unpack & check the item is correct & no damage has occurred during transit.
!
If there are any visible defects DO NOT PROCEED WITH THE INSTALLATION & please contact the place of purchase immediately.
!
ANY CLAIMS FOR DAMAGE WILL NOT BE ACCEPTED AFTER INSTALLATION.
Protect your spa bath before & during installation, scratches &/or cracks &/or surface damage sustained during or after the
!
installation are not covered by warranty.
Installation must be in accordance with building regulations & local authority requirements.
!
Electrical installation must comply with AS:3000 - Electrical Wiring Rules.
!

CARING FOR YOUR SPA BATH

DECINA USES THE HIGHEST SANITARY GRADE ACRYLIC, HOWEVER NAKED FLAMES, CIGARETTES OR STRONG CHEMICALS
SHOULD BE AVOID & REMOVED IMMEDIANTLY. TO PRESERVE THE HIGH GLOSS ACRYLIC SURFACE:
When filling the spa bath start with cold water to allow the bath to gradually adapt to the temperature.
!
After using your spa bath clean with a soft cloth & warm soapy water to clean any oils or soap, to prevent tide marks &
!
preserve the polished surface.
Clean using warm soapy water & only mild liquid detergents. Do not use powders, pastes, creams, chemicals, window cleaning
!
sprays or abrasive cleaners.
Cream cleaners may only BE USED to remove stubborn marks.
!
Scratches can be removed with a fine polish like Brasso.
!
THIS PRODUCT MUST BE INSTALLED BY A QUALIFIED TRADESMAN