Temperature Setting; Memory Function; Fault Indication; Fault Description - Koolatron WC29 User Manual

OPERATING INSTRUCTIONS (cont.)

TEMPERATURE SETTING

• Set the desired cooling temperature by pressing the 'UP' or 'DOWN' key to set your desired
temperature. Each depression of the buttons will scroll through the available temperature
settings in increments of 1 degree.

MEMORY FUNCTION

• The cooler has the power off memory function. When power on again, the wine cooler will
operate according to the setting mode before power off.
• For sparkling wine the temperature should be set between 46°- 48°F (8°- 9°C)
• For white wine the temperature should be set between 48°- 54°F (9°- 12°C)
• For red wine the temperature should be set between 55°- 65°F (13°- 18°C)
NOTES
• If the unit is unplugged, power loss, or turned off, you must wait 3 to 5 minutes before
restarting. If you attempt to restart before this interval the Wine Cooler will not start.
• When you use the wine cooler for the first time or restarting after being shut off for a long
time, there could be a few degrees variance between the temperature you select and the
one indicated on the LED readout. This is normal and it is due to the length of the activa-
tion time. Once the wine cooler is running for a few hours everything will return to normal.
• The zone temperature may have a difference of +/- 5°F (+/- 3°C) from setting depending
on loading and ambient conditions.
WARNING
Be careful when using the touch screen panel. Please protect the panel carefully to avoid
scratches, and maintain far away from strong magnetic field and high humidity areas, these
conditions may prevent the wine cooler from working properly.

FAULT INDICATION

• If the indication of the following table is displayed on the display area, it means the cooler
is with faults.
FAULT CODE

FAULT DESCRIPTION

upper chamber display E1 Failure of temperature sensor in upper chamber
lower chamber display E1 Failure of temperature sensor in lower chamber
upper chamber display E4 Failure of defrosting sensor in upper chamber
lower chamber display E4 Failure of defrosting sensor in lower chamber
upper chamber display E6 Communication fault
WARNING When the above faults are displayed on the screen, please do not disassemble to check
by yourself. Please contact the special maintenance personnel of the local after-sales service
company for the maintenance.
5