Summary of Contents for Heicko HD15BT
- Page 3 The emitters described are exclusively intended for the transmission of radio signals to our tubular motors and external receivers with radio code G2. Information on which emiters have radio code G2 is available at www.heicko.de or www.heicko-bewegt.de. The scope of this manual is limited to the description of the emitter as a control element. The description of the programming (“teaching“, etc.) with respect to the above mentioned tubular motors with built-in receiver as well as the external receivers is given in the instructions for the tubular motors with built-in receiverse and external receivers.
- Page 4 Important! - Only button cells of the same type (see page 1) should be used as a replacement. © heicko 2019 - Reproduction and reprinting of images, texts and other content for purposes other than purely private needs our express and written consent. We reserve the right to take legal action against the unauthorized use of the content.
Need help?
Do you have a question about the HD15BT and is the answer not in the manual?
Questions and answers