Download Print this page
HighSecLabs Corona Tag User Manual

HighSecLabs Corona Tag User Manual

Social distance monitoring employee badge

Advertisement

Quick Links

Corona Tag | USER MANUAL
Table of Contents
1
2
3
SECTIONS
Social Distance Monitoring Employee Badge
Administrator and Deployment Guide
HDC24213 Rev1.1
KVM Remote RS-232 Control | QUICK SETUP GUIDE

Advertisement

loading

Summary of Contents for HighSecLabs Corona Tag

  • Page 1 Corona Tag | USER MANUAL Table of Contents SECTIONS Social Distance Monitoring Employee Badge Administrator and Deployment Guide HDC24213 Rev1.1 KVM Remote RS-232 Control | QUICK SETUP GUIDE...
  • Page 2: Table Of Contents

    TABLE OF CONTENTS Introduction End User Usage Instructions Default Behaviour Deployment Procedure Configuration Admin Tool Instructions Corona Tag | USER MANUAL...
  • Page 3: Introduction

    The manual will review: Initial configuration • Deployment • Normal use • Maintenance • Encounter investigation. • The target audience for this manual are administrators that are deploying and possibly investigating tags in the field. Corona Tag | USER MANUAL...
  • Page 4: End User Usage Instructions

    Red or Green Led In normal operation mode EMB-1 LED will flicker briefly every 10 seconds. The LED will flicker RED if there is another tag in the near environment and GREEN if no other tags are identified. Corona Tag | USER MANUAL...
  • Page 5: Default Behaviour

    Session Time – Minimal time for an encounter to be • logged. By default, 15 minutes, can be configured using the configuration tool. Timeout – Maximal time of a timeout during an • encounter for it to have continuity. By default, 4 minutes. Corona Tag | USER MANUAL...
  • Page 6: Deployment Procedure

    QR code on the back of the Tag Configuration In order to configure EMB-1 with parameters different than default the administrator will need to use EMB-1 configuration tool. The tool can be downloaded from: www.highseclabs.com Corona Tag | USER MANUAL...
  • Page 7: Admin Tool Instructions

    Admin Tool Instructions Connecting the Corona Tag to Tag Tool: Connect EMB-1 to the configuration PC using the custom configuration cable. Please note, this is not a standard USB cable. A specially designed cable is needed which is shipping to the EMB-1 administrator kit.
  • Page 8 Highseclabs.com ©2020 All rights reserved. HSL logo and product names are trademarks or service trademarks of HighSecLabs Ltd (HSL). All other marks are the property of their respective owners. Images for demonstration purposes only. This document may contain confidential and/or proprietary information of HSL...