Related Manuals for SOMNI SOMNImask
Summary of Contents for SOMNI SOMNImask
- Page 1 Somni mask is the easiest way to lucid dreaming SOMNI mask® Instructions for use...
- Page 2 TABLE OF CONTENTS Disclaimer_______________p.3 Safety precautions________p.4 First launch______________p.5 Settings_________________p.8...
-
Page 3: Disclaimer
DISCLAIMER SOMNImask® is not a method of mind intrusion and is not associated with mind-altering substances, hypnotic influences, or any other methods of direct influence on human consciousness. It is simply a tool to help you achieve lucid dreaming under certain conditions. -
Page 4: Safety Precautions
SAFETY precautions We strongly reccomend you to use the headphones from the package contents, cause too long wires can cause suffocation in your sleep. The Li-Po battery is completely safe and can be used near the head and organs without the risk of exposure to radiation. -
Page 5: First Launch
FIRST LAUNCH In order to turn on SOMNImask® you need to hold down the device button for two seconds After that, the indication of the remaining battery will begin button The battery charge is shown based on the LED color when the device is turned on or off. - Page 6 There is only one button for the device and it’s located on the top of the device. With the jack 3.5mm button you can turn the device on or off and also test the audible light signals. button audio input You can connect headphones to the device.
- Page 7 eye device An eye device is positioned in the eye socket of the mask to record eye movement. Eye sensors are located in the device window. The mask completely blocks out the light inside for effective tracking of eye movement. The device has an accelerometer sensor for head tracking.
-
Page 8: Settings
SETTINGS At the bottom of the device is the micro-USB input, this device input has these functions: charging the device and connect to a computer or USB-OTG micro-USB input In order to charge or connect the device to a computer, you need to connect the device and the computer with the USB wire. - Page 9 The device plays the original audio files: Lucid, Calm, Alarm (mp3 only) To start configuring the device you need to go to the device config page at somni.org/program/ After you have gone to the page, you need to click “Upload” button...
- Page 10 After clicking on the upload button, a window for selection will automatically open. Select “USB Drive” from the list, then go to the “Configs” folder and select the “default.txt” file, then click Open. After you have opened the default.txt configuration file, you will see the configuration page.
- Page 11 Then assing this audio in the “default.txt” file. Just go to the Configs folder and open the “default.txt” file, then rename the old parameter “fileLucid Lucid.mp3” to “fileLucid my.mp3” and save the file. Somni Team wish you to cre- ate a dream that you deserve Instructions will be updated soon...
Need help?
Do you have a question about the SOMNImask and is the answer not in the manual?
Questions and answers