Subscribe to Our Youtube Channel
Summary of Contents for Autronica 116-GR-7600/V2
- Page 1 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting 116-GR-7600/V2 WIRELESS EMERGENCY LIGHTING Quick Installation Guide WEL_qInstallGuide_V2_rv3 - Autronica.docx...
- Page 2 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting 116-GR-7600/V2 WIRELESS EMERGENCY LIGHTING The wireless emergency lighting is a safe and versatile solution for monitoring and controlling installations of self-contained emergency luminaires from a central point, via the Autronica 116-GR-7600/V2 software application.
- Page 3 Multiple wireless networks can co-exist in an installation simultaneously and be monitored via a master control panel (116-GR-7600/V2 software app). Each system can support up to 16 Gateways and up to 200 wireless devices per Gateway. WIRELESS NETWORK SPECIFICATIONS & FEATURES: •...
- Page 4 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting • Hop level: The hopping functionality is the fundamental feature of a mesh wireless network. Thanks to this, there is no need for direct connection between the Gateway and every wireless device (luminaires, etc), as the message can be re-transmitted by any wireless device located between the Gateway and the target device, until it reached the destination, as long as they belong to the same network and are in range.
- Page 5 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting WIRELESS NETWORK INSTALLATION TIPS & RESTRICTIONS • If another wireless system operating at 868 MHz is present in the area, prior to installation, use the ‘Wireless Installation Tool’ application along with a 116-GR-7605/V2 or 116-GR- 7607/V2 to check frequency spectrum (Spectrum Analyzer) on RF channels 2, 3, 4 and 5.
- Page 6 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting • The wireless signal is capable of traveling through interior brick walls and conventional furniture (wood or synthetic), covering distances of 20 to 25 meters in building interior. Building floors are usually made of reinforced concrete with steel/iron bars that can prevent signal from passing through.
- Page 7 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting independent wireless network for each building, which can be controlled via the same control panel (as long as there is a common local area network for every building). • Prefer to install the Gateway at a central point, where there are at least 1 wireless device (e.g.
- Page 8 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting WIRELESS DEVICES AND PERIPHERALS 116-GR-7610/V2 The “116-GR-7610” is a standalone control panel for the wireless emergency lighting. It is equipped with 7” color touch screen and backup battery of 1h duration. Runs the Standard version of “116- GR-7600/V2”...
- Page 9 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting 116-GR-7604/V2 Network Extender The “116-GR-7604/V2 Network Extender” is a signal range extension device, thus a signal repeater. It re-transmits received messages, similarly to wireless emergency luminaires (20~25m range). It is supplied via mains power (220-240V/50-60Hz) without self-contained backup operation.
-
Page 10: Installation
Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting INSTALLATION Each wireless device comes with the factory default settings of SID, NKey and RF Channel (which are ‘00000001’, ‘00000000’ and ‘2’ respectively). In order for a device to join a wireless network, the SID, NKey and RF Channel values must match. - Page 11 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting Figure 6: RSSI Tester measurement 4. In the meantime, when installing a wireless device into place, take notes regarding its location and match its UID address (you can use the extra UID stickers included in their package).
- Page 12 Quick Installation Guide – 116-GR-7600/V2 Wireless Emergency Lighting Figure 7: LED indications on wireless adapter 7. When the installation of the wireless devices has been completed, create a graphical installation plan of the entire installation, on paper or digital. This step is very important for later commissioning, maintenance and trouble-shooting.
Need help?
Do you have a question about the 116-GR-7600/V2 and is the answer not in the manual?
Questions and answers