Advertisement
Quick Links
Advertisement
Summary of Contents for Dedacciai Strada NERISSIMO
- Page 1 OWNER'S MANUAL nerissimo...
- Page 2 Thank you for choosing a DEDAcciAi product. We in DEDAcciAi develop, manufacture, and constantly test our products in order to maintain the highest standards of quality. We ask for your collaboration to preserve and correctly use DEDAcciAi components. To achieve this, we invite you to read these instructions carefully and retain this manual for future use.
-
Page 3: Table Of Contents
CONTENTS inDEx ____________________________________________________________________ pag. 4 USE LiMiTS ________________________________________________________________ pag. 4 WHAT iS iMPORTAnT FOR YOUR SAFETY? _____________________________________ pag. 5 THE NERISSIMO FRAME KiT _________________________________________________ pag. 6 PARTS AnD ASSEMBLinG ____________________________________________________ pag. 9... -
Page 4: Index
INdEx NERISSIMO The following manual shows what is important to know about your Dedacciai Strada frame kit you are going to purchase and/or to equip as bicycle We highly invite you to carefully read it and to periodically check the website www.dedacciaistrada.com in order to be updated regarding further information,... -
Page 5: What Is Important For Your Safety
WhAT IS IMpORTANT fOR yOUR SAfETy? We highly suggest to equip your Dedacciai Strada frame kit to professional and qualified mechanic official Dedacciai. Every year, or every 5.000 km, inspect and check-up the frame for the grease operation service, in that occasion it is important to check carefully the frame with particular regards to the connection between head tube and down tube, down tube to bottom bracket. -
Page 6: The Nerissimo Frame Kit
Flex seat stays increase vertical compliance for additional comfort, without reducing lateral stiffness. Each NERISSIMO frame carries a serial number, stamped underneath of the down tube, close to the bottom bracket. The serial number is used for traceability and warrantee purposes. Do not remove or grind the number. - Page 7 4.3 GEOMETRy SIZE Refer. design 75° 74,5° 74° 73,5° 73° 71,5° 71,5° 72° 72° 73°...
- Page 8 4.4 CAbLE ROUTING ANd COMpATIbILITy The NERISSIMO is compatible for: • Mechanical groupsets external equipment via alloy parts and regulators • Front derailleur clamp-on-type 35 mm MECHANICAL CABLE ROUTING Below the parts needed for a mechanical groupset • Electronic groupsets: Shimano Di2 & Campagnolo EPS internal equipment •...
-
Page 9: Parts And Assembling
pARTS ANd ASSEMbLING 5.1 fORk STREAM full carbon tapered steering tube with the following features: • carbon blades • carbon drop out with metal disc support post mount suitable 160 mm rotor disc • Finishing: External lamination UD • Steerer: 1”1/8 top 1”1/2 bottom, •... - Page 10 5.3 STEERING ASSEMbLING OPERATIONS: Install the headset crown race on the bolt with steerer tube without damaging its top star nut surface. Verify that the crown race has been fitted correctly. Insert the fork in the head set group Stem as shown in the picture.
- Page 11 WARNING: the carbon dust and resin generated during cutting and sanding is harmful. Do not inhale it! WARNING: wear gloves, glasses and mask during cutting operation, as the fibers released can be harmful and cause allergies. Slip the fork into the headset and insert the supplied expander. Tighten the expander with a 5 N/m torque max.
- Page 12 5.4 SEAT pOST EqUIpMENT The NERISSIMO frame kit allows seat tube of 31,6 mm diameter. The seat tube has to be insert in the frame for at least 80 mm, or in any case the minimum size shown by the constructor.
- Page 13 DEDAcciAi reserves the right to partially or totally change products, prices and warranty without notice.
- Page 14 Dedacciai Srl - Via Leonardo da Vinci, 19 26010 campagnola cremasca (cR) - italy Ph. +39 0373 74 499 info@dedacciaistrada.com www.dedacciaistrada.com...