Advertisement
E T C S e t u p G u i d e
A s s i g n t h e D o c k i n g S t a t i o n I P A d d r e s s
Step 1:Power on the Handheld Touchscreen and dock it to the Docking Station.
Step 2: Press the [Setup] button on the Touchscreen. The Setup "About" screen displays.
Step 3: Press the [Dock] tab. The passcode keypad displays.
Step 4: Enter the setup or admin passcode. By factory default, the setup passcode is set to 3031. The
"Dock" configuration page displays.
Step 5: The Dock configuration page provides two IP Addressing modes for use with the Docking
Station; Manual and Automatic.
• Manual - in manual address mode, the IP address and settings are user configured. To
change any portion of the address, simply touch inside the field you wish to modify. A
numeric keypad displays for edit of the selected field. Make the modifications to the selected
field then select other fields as necessary. Pressing [OK] will save any changes and exit the
Setup Menu. If a configuration is active, you will be returned to the configuration.
• Automatic - in automatic address mode, the IP address and other network settings will be
automatically assigned by a connected DHCP server. The Handheld Touchscreen will
display the Docking Stations current settings; the settings are not editable. Pressing [OK] will
save any changes and exit the Setup Menu. If a configuration is active, you will be returned
to the configuration.
C o n f i g u r e t h e D o c k i n g S t a t i o n H F C h a n n e l
The Docking Station must be assigned to the same HF Channel as the Handheld Touchscreen for
communication over MeshConnect. Configure the HF Channel for the Docking Station from the
connected Paradigm Architectural Control Processor (P-ACP).
Detailed instructions are available in the Paradigm Architectural Control Processor Configuration
Manual.
Step 1:Navigate to the Arch Setup > Lonworks Connections menu.
Step 2: Select Wireless HF Channel.
Step 3: Select the Docking Station from the list for configuration.
Step 4: Select the desired HF Channel. Available settings are HF Channel 1 through HF Channel 12.
N o t e :
Uni son Pa r adi gm Do cki ng St at io n Set u p Gui de
All wireless devices that are intended to communicate with each other must be set to
the same HF Channel. This includes Handheld Touchscreens when docked to Docking
Stations.
Unison Paradigm Series
Page 3 of 3
El ect r on ic T he at r e Con tr o ls , I nc.
Advertisement
