Related Manuals for Perenio Joule Eco Smart Heater
Summary of Contents for Perenio Joule Eco Smart Heater
- Page 1 Installation and Operation Manual for Perenio® Joule Eco Smart Heater (Article: PEJPH01-PEJPH04) April, 2021...
-
Page 3: Introduction
Copyright of ©Perenio IoT spol s r.o. All rights reserved. The Perenio® trademark is owned by Perenio IoT spol s r.o. (hereinafter referred to as the Perenio IoT). All other similar trademarks and names, as well as logos and other symbols are the property of their respective owners*. -
Page 4: Responsibility And Technical Support
Perenio IoT reserves the right to modify the device and make corrections or changes to this document without prior notice of the User, and shall not be responsible for any... -
Page 5: Conformance To Standards
For more information on proper disposal, please contact your device supplier or local authorities responsible for waste management ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 5 of 55... - Page 6 Details on available Certificates are specified in Section 6 of the present document. For copies of Certificates and Reports, please visit a corresponding Section at perenio.com. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 6 of 55...
-
Page 7: Limitations And Warnings
16. Do not use the device in a combustible, explosive and/or dusty environment, as well as in areas where corrosion of its materials is possible. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 7 of 55... - Page 8 22. Do not use the device in areas with people who are unable to leave the room on their own or who are not under the constant supervision of a person responsible for their safety. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 8 of 55...
-
Page 9: Table Of Contents
2.2 Initial Switching On ................23 2.3 Manual Operation ................23 2.4 Selection of the Mobile App for Control ........... 24 2.5 Remote Control via Perenio Smart App ........... 24 2.5.1 Installation of the Application ............24 2.5.2 Activation Process ................25 2.5.3 Additional Settings ................ - Page 10 2.5.10 Changing the Room or Location for the Eco Smart Heater ....37 2.5.11 History and Push Notifications ............37 2.6 Remote Control via Perenio Lite App ............38 2.6.1 Installation of the Application ............38 2.6.2 Eco Smart Heater Connection Process ..........39 2.6.3 Additional Settings ................
-
Page 11: General Description And Specifications
1 General Description and Specifications 1.1 General Purpose The Perenio® Joule Eco Smart Heater is an electric heating device with mainly an infra-red heat emission designed for primary, supplementary and local heating of domestic, industrial and other premises such as flats, offices, commercial premises, sports halls, educational facilities, catering facilities, etc. -
Page 12: Figures And Tables Figure 1 - Appearance
Installation and Operation Manual for Perenio® Joule Eco Smart Heater – Appearance Figure 1 Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 12 of 55... -
Page 13: Figure 2 - Buttons, Ports And Indicators
Cable to connect the heater to the mains socket Temperature sensor Sensor that measures the ambient air temperature and ensures accuracy when maintaining the required heating temperature ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 13 of 55... - Page 14 3 seconds Press and hold the power Switching to activation mode in the “Perenio Smart” button for 4 to 10 seconds or the “Perenio Lite” mobile app Press and hold the power Activation of the factory reset process...
-
Page 15: Technical Specification
Room area 25 m Nutrition Rated input voltage: 220V Rated input current: 3.5A Rated power: 700-800W Power supply voltage: 220-230V, 50Hz Standby power: 1W max ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 15 of 55... -
Page 16: Scope Of Delivery
2 years Certification CE, EAC, RoHS, UA.TR 1.3 Scope of Delivery The Perenio® Joule smart eco-heater comes with the following devices and accessories: 1. Perenio® Joule Eco Smart Heater – 1 pc. 2. Legs for floor installation – 2 pcs. -
Page 17: Packaging And Labelling
* Images are provided for informational purposes only 1.4 Packaging and labelling The Perenio® Joule Eco Smart Heater is supplied in an individual carton package of 106cm x 38.5cm x 8.5cm (L x W x H) containing the full name and marking of the device, the list of accessories provided and basic technical specifications thereof, as well as the date of manufacture and information about the Manufacturer of devices. -
Page 18: Remote Control Via Voice Assistants
1.6 Remote Control via Voice Assistants To control the Eco Smart Heater via the Yandex Smart Home (Alice) or Amazon Alexa app, you should first activate the device in the Perenio Smart or Perenio Lite app. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved... -
Page 19: Installation And Setup
See below possible installation locations for the Eco Smart Heater. Examples of installation* Figure 4 – * Images of are provided for informational purposes only ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 19 of 55... -
Page 20: First Installation And Configuration
NOTE. Do not use the device at ambient temperatures of 0°C or lower, as it will initiate an error, and the device will not be switched on. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 20 of 55... -
Page 21: Floor Installation (Option 1)
Figure above. During installation, please ensure that the screws are securely tightened and that the legs are oriented correctly towards the device panel (See Figure above). ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 21 of 55... -
Page 22: Wall Installation (Option 2)
335 mm Spacing for drilling holes (Wall mounting) Figure 7 – 4. Insert the dowels in the drilled holes and screw in the screws supplied. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 22 of 55... -
Page 23: Initial Switching On
NOTE that you should unplug the power cable from the electrical socket to completely de-energize the Eco Smart Heater. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 23 of 55... -
Page 24: Selection Of The Mobile App For Control
Perenio Smart mobile app (recommended); • Perenio Lite mobile app. NOTE that the Perenio Smart mobile app is recommended because it has more functions and allows for control of all Perenio® devices. 2.5 Remote Control via Perenio Smart App 2.5.1 Installation of the Application The device shall be managed via a free mobile application available for downloading in Google Play or App Store. -
Page 25: Activation Process
Clink on “START SEARCHING” button; g. Wait for the connection process to be completed. NOTE. To eliminate connection failures, follow instructions specified on corresponding screens of the smartphone. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 25 of 55... - Page 26 The Eco Smart Heater is displayed in the “Devices” tab. In this tab, you can switch on/off both the device and its climate control mode, as well as view the current room temperature. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 26 of 55...
-
Page 27: Additional Settings
Installation and Operation Manual for Perenio® Joule Eco Smart Heater 2.5.3 Additional Settings Once the Eco Smart Heater is activated in the “Perenio Smart” mobile app, the User can make the following settings remotely: • Change or upload the device image for easier identification of the Eco Smart Heater in the list of connected devices;... -
Page 28: Control Panel
Move the climate control slider to the right or to the left to activate or deactivate the mode, respectively; b. Set the temperature to be maintained. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 28 of 55... -
Page 29: Viewing Energy Statistics
Installation and Operation Manual for Perenio® Joule Eco Smart Heater 2. From the “Devices” tab in the “Perenio Smart” mobile app: a. Click on the three-dot icon next to the Eco Smart Heater name; b. In the popup window, move the climate control slider to the right or to the left to activate or deactivate the mode, respectively;... -
Page 30: Setting Scheduled Timers
This timer is not preset by default for the device. NOTE. Available options to set timers depend on the selected action for the Eco Smart Heater (Turning on or off). Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 30 of 55... - Page 31 5. Select days of the week when the Eco Smart Heater shall be turned on. 6. If required, activate the climate control mode, and select a maintained temperature. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 31 of 55...
- Page 32 1. Click on the “Scheduled timer” button in the device control panel, and then on the “+” icon in the right upper corner of the screen. 2. In the "Add Scheduled Event" screen, select the power type – “Turn off”. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 32 of 55...
- Page 33 5. Select the days of the week on which the Eco Smart Heater shall operate on a timer. 6. If required, activate the climate control mode, and select a maintained temperature. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 33 of 55...
- Page 34 Swipe from left to right on the desired timer in the “Scheduled timer” tab, and tap the bin icon. NOTE. A deactivated timer only can be deleted. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 34 of 55...
-
Page 35: Event History
• Videos and images; • History of events; • Statistics. By default, all users of the “Perenio Smart: Building Management System” Mobile App are subscribed to a free plan with a limited storage period. To view and change the current type of Subscription, the User shall go to the Side Menu and click on a corresponding button (See Figure on the right). - Page 36 Installation and Operation Manual for Perenio® Joule Eco Smart Heater The following details for the current Subscription type will be displayed: • Subscription name (Perenio Basic, Perenio Pro or Perenio Extra); • Subscription (monthly) fee; • Option to change the type of Subscription;...
-
Page 37: Changing The Room Or Location For The Eco Smart Heater
Change the Room in Eco Smart Heater settings in the User Account. 2. Change the Location: a. Sign in to the Perenio Smart app and select the Location where the Eco Smart Heater is activated; b. In the Devices tab, select the required Eco Smart Heater from the list and click on the icon (Settings);... -
Page 38: Remote Control Via Perenio Lite App
Heater firmware update process, as well as low battery notifications and changes of the Armed/Disarmed mode for the Location. Standard events. Various news and other information from Perenio IoT, as well as alerts from both the Door&Window Sensor and the Motion Sensor when in the Disarmed mode. -
Page 39: Eco Smart Heater Connection Process
Wait for the connection process to complete and click on “Done”. NOTE. If the connection fails, you must follow the instructions on the smartphone screen. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 39 of 55... - Page 40 From this tab, without opening the control panel, you can switch the heater on/off, set the temperature, activate the child lock and set the countdown timer. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 40 of 55...
-
Page 41: Additional Settings
Installation and Operation Manual for Perenio® Joule Eco Smart Heater 2.6.3 Additional Settings After activation of the Eco Smart Heater in the Perenio Lite app, the User can make the following settings remotely: • Change or upload the device image... -
Page 42: Selecting The Control Mode
The selected mode will be displayed in the Eco Smart Heater control panel. NOTE. Mode selection is enabled for the switched-on Eco Smart Heater only. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 42 of 55... -
Page 43: Setting The Countdown Timer
The selected timer is considered activated when ticked in the pop-up window. Click on “Done” to save the settings. The selected switch-off time will be displayed in the Eco Smart Heater control panel. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 43 of 55... -
Page 44: Changing Settings
Perenio® Joule Eco Smart Heater 2.6.7 Changing Settings In the “Settings” tab of the Joule Eco Smart Heater control panel, the User may perform the following actions: • Enable the Child Lock Mode by moving the slider to the right or to the left. When the Child Lock Mode is... - Page 45 2. Select the time to switch the device on or off. 3. Press the “Repeat” button to select days of the week when the Eco Smart Heater shall operate on a timer. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 45 of 55...
- Page 46 How to delete the timer Swipe from right to left on the desired timer in the “Timer” tab, and press “Delete”. NOTE. An activated timer can also be deleted. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 46 of 55...
-
Page 47: Removing The Device From The Account
A new window will be displayed with an option to delete the device. Press the “Delete device” button to delete all device data from your account. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 47 of 55... -
Page 48: Maintenance And Repair
• Repair mechanical damages to devices (in Service Centers). The Perenio® Joule Eco Smart Heater repairs shall be carried out in Service Centers. In the case of warranty repairs or replacement, the User shall provide the Seller with the sales receipt and the purchased device. -
Page 49: Warranty Obligations
Perenio® Joule Eco Smart Heater 4 Warranty Obligations The warranty period for the Perenio® Joule Eco Smart Heater shall be one (1) year from the date of sale to the End User, while the service life shall be two (2) years. - Page 50 CONSEQUENTIAL DAMAGE OR LOSS INCLUDING BUT NOT LIMITED TO COMMERCIAL LOSS, LOSS OF PROFITS, LOSS OF CONFIDENTIAL OR OTHER INFORMATION, AS WELL AS DAMAGES CAUSED BY BREAKS IN COMMERCIAL OR PRODUCTION ACTIVITIES DUE Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 50 of 55...
- Page 51 ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 51 of 55...
-
Page 52: Storage, Transportation And Disposal Of Devices
For the device disposal purposes, it shall be returned to the point of sale or to the local processing center. For detailed information on recycling of the present device, please contact your waste management company. Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 52 of 55... -
Page 53: Other Information
Declarations EEA declaration of conformity as of 22.09.2020 Declaration of Conformity STB as of d 03.11.2020 Addresses of Service Centers are available at perenio.com in the ‘Support’ Section. ©Perenio IoT spol s r.o. All rights reserved Document version: 1.1.0 Page 53 of 55... -
Page 54: Troubleshooting
During operation, the Eco Smart Heater Change orientation of Eco Smart Heater tilted dangerously Eco Smart Heater beeps and the LED an upright position flashes red Document version: 1.1.0 ©Perenio IoT spol s r.o. All rights reserved Page 54 of 55... -
Page 55: Glossary
Perenio Lite Simplified software developed by Perenio IoT for remote device management Perenio Smart Software developed by Perenio IoT for remote control of wireless Cameras from smartphones Yandex Smart An application that allows to control smart devices through the Home...