Download Print this page

Opitec 116.208 Quick Start Manual

Acrylic mobile phone / tablet holder to go

Acrylic Mobile Phone /

Parts List

acrylic glass

Tablet Holder To Go

The OPITEC range of projects is not intended as toys for young children. They are teaching aids

for young people learning the skills of Craft, Design and Technology. These projects should only

be undertaken and operated with the guidance of a fully qualified adult. The finished projects

are not suitable to give to children under 3 years old. Some parts can be swallowed. Danger of

Quantity

116.208

Please Note!

suffocation!

Size (mm)

250x30x4

150x30x4

fretsaw or

sandpaper

scroll saw

Designation

acrylic glass

warding file

adhesive tape

Part No.

Table of Contents

Do you have a question about the 116.208 and is the answer not in the manual?

Page 1 Please Note! The OPITEC range of projects is not intended as toys for young children. They are teaching aids for young people learning the skills of Craft, Design and Technology. These projects should only be undertaken and operated with the guidance of a fully qualified adult. The finished projects are not suitable to give to children under 3 years old.
Page 2 Instructions 116.208 Acrylic Mobile Phone / Tablet Holder To Go Divide the acrylic glass (1) in two parts according to dimensions as shown. If the acrylic glass is cut with the scroll saw, this should be carried out slowly, because the acrylic glass can melt if the speed is too fast.
Page 3 Instructions 116.208 Acrylic Mobile Phone / Tablet Holder To Go Template Acrylic Glass 1+2 S 1:1...