Installation - VacPak-It 186VMC10V Quick Start Manual

Vacuum - MARINATE MODE:
Press marinate button, (Marinate Time light on), press Start Key, machine will
automatically enter the vacuum marinate cycle (every 9 minutes a cycle, could be set
up to 11 cycles) until the end; During the vacuuming process, the value on the LED
rises from 0 to the default vacuum value. During marinate process, the value on the
LED is gradually decreased from the default vacuum value.
7. Pouch Inspection
VACUUM – check the quality of the vacuum by looking at the tightness of the pouch
and the product. If you notice air pockets increase the vacuum time by 5 seconds, test
again. The vacuum time could take up to 60 seconds depending on the pouch size
and the volume of the product being packaged.
SEAL – Inspect the pouch seal.
Note: A positive seal will look "clear" upon inspection. If the seal is "spotty or
incomplete" increase the sealing time by 1 second. If the seal is "white or milky"
decrease the seal time by 1 second. *If the vacuum bag is not placed straightly
enough by the removable hook, it may lead to poor vacuum or poor sealing.
product installation
Note: Please keep the vacuum machine vertical.
1. According to the positioning drawings to fix the installation hole.
2. Drill in the wall.
3. Install the expansion screw.
4. Install the fixing screw (Do not completely fit fixed screw into the expansion screw,
leave 2-3mm empty space between hexagonal end and the wall
5. Install the machine in the fixed screw to complete the installation.
9.