Download Print this page

weasy PLW225 Instruction Manual page 4

Electric hotplates

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
the producer or importer or any person who is qualified,
approved and competent to perform this kind of repairs in
order to avoid all danger. In any case you should return the
appliance to this electrician.
This appliance is intended to be used in household and
q
similar applications such as:
-staff kitchen areas in shops, offices and others working
environments;
-farm houses;
-by clients in hotels, motels and other residential type
environments;
-bed and breakfast type environments.
The appliance cooking operation shall not longer than 1 hour.
USING
• Remove all packaging material before using the cooking plates.
• Check the voltage marked on the product is the same as your supply voltage.
• Select a suitable position close to an electric socket, on a dry and even surface.
• Make sure the controls are in the OFF position (MIN facing upwards). Plug in.
• The invisible protective coating must be removed before you can use the appliance. To do this, set
the controls to the maximum setting and leave switched on for approximately 4 minutes. Smoke
will develop, make sure that the room is ventilated. Switch off the cooking plate and allow to cool
down completely. The cooking plate is now ready for use.
• Always use flat-bottomed saucepans, which make good contact with the cooking plate. The
saucepan bases should ideally be of the same size as the cooking plate.
• Select the temperature. The cooking plate has a range of temperatures. Use the lower heat settings
(min to 4) for simmering and gentle heating and the high settings 5 to MAX for boiling
• Due to the cooking plate's construction, residual heat will remain after switching off. This may be
used to keep food warm for a short period.
• After use, turn temperature dial to "MIN" and unplug the appliance from electrical outlet.
CLEANING
• Before cleaning, unplug and wait for the appliance to cool
down.
• Wipe with a moistened cloth.
• Do not clean with any abrasive scouring pad or steel wool,
as this will damage the finish.
• Do not immerse in water or any other liquid.

Advertisement

loading

Related Products for weasy PLW225