Advertisement

Quick Links

Mower
CAT 310
( Type PTM 342 : + . . 01001 )
Snap Connector (1) .......................................................................................................................... 4
Attaching problems .......................................................................................................................... 4
Connecting to tractor ........................................................................................................................ 5
Adjusting(8i the MULTITAST-System L ............................................................................................ 5
Spring tensioning ............................................................................................................................. 5
Adjusting the upper link .................................................................................................................... 5
Adjustment of the damped steering mechanism (DSM) .................................................................. 3
Function of the damped steering mechanism .................................................................................. 3
Problems which may arise during operation and their correction .................................................... 3
Mowing ............................................................................................................................................. 9
Hints ................................................................................................................................................. 9
Double cut ........................................................................................................................................ 9
Swath makers (CAT 270 plus front Masch.Nr.: . . . - 03690) ....................................................... 12
Swath makers (CAT 310 plus front Masch.Nr.: . . . - 01390) ....................................................... 12
Swath makers (CAT 270 plus front Masch.Nr.: . . . + 03691) ...................................................... 13
Swath makers (CAT 310 plus front Masch.Nr.: . . . + 01391) ...................................................... 13
Maintenance ................................................................................................................................... 15
Safety points .................................................................................................................................. 15
Pay attention to correct assembly! ................................................................................................. 15
Changing the cutters ...................................................................................................................... 15
Checking the mowing blade suspension ........................................................................................ 15
Mower disc ..................................................................................................................................... 15
Winter storage ................................................................................................................................ 15
Lubrication chart ............................................................................................................................ 15
Shorten upper link ............................................................................................................................ 1
plus front

Table of contents

Excerpt from
GB
operating manual
Nr. 342960GB.pdf

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the CAT 310 plus front and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Pottinger CAT 310 plus front

  • Page 1: Table Of Contents

    Swath makers (CAT 270 plus front Masch.Nr.: . . . - 03690) ............12 Swath makers (CAT 310 plus front Masch.Nr.: . . . - 01390) ............12 Swath makers (CAT 270 plus front Masch.Nr.: . . . + 03691) ............13 Swath makers (CAT 310 plus front Masch.Nr.: .
  • Page 2: Snap Connector (1)

    Connecting unit to tractor Snap Connector (1) Safety hints: see supplement-A1 points 8a. - 8h.) - Mount snap connector (Weiste triangle) onto the front loader in a vertical position or inclined slightly forward. - Lock lower link pin (2) free of play.
  • Page 3: Connecting To Tractor

    Connecting unit to tractor Connecting to tractor (8a - 8e Spring tensioning The force applied on the ground by the mowing drums is controlled by spring tension. Before connecting disconnecting 1. Lift unit hydraulically. - bring both swath discs to the most outward position (A).
  • Page 4 ANBAUTEILE PIÈCES D'ADAPTATIONS SPÉCIALES SPECIAL ATTACHING KITS SPECIALE AANBOUWDELEN 80 (2x) 150 (2x) ø25 ø19 FENDT 304 TD40/94/11 ANBAUKONSOLE Variante - 2 Anbau CAT NOVA 260 an den MB-TRAC 1000 front • Es wird nur eine Kette verwendet. • Am Mähwerk ist der linke Hebel (H) und die Kette zu entfernen.
  • Page 5 ANBAUTEILE PIÈCES D'ADAPTATIONS SPÉCIALES SPECIAL ATTACHING KITS SPECIALE AANBOUWDELEN 70 / 10 DEUTZ AGRO-XTRA ANBAUKONSOLE TD40/94/9 Massey Ferguson 2 Stk. ANBAUBOLZEN für MF 3065 Material: ST 50-2K TD40/94/12 - 6. 9501 ANBAUTEILE (333)
  • Page 6: Adjustment Of The Damped Steering Mechanism (Dsm)

    DAMPED STEERING MECHANISM (optional equipment) 5. Remove mounting bracket and Function of the damped steering mechanism fit in position "B". • The damped steering should be used when • Secure mounting bracket with spring clip (F). operating on uneven terrain. The advantages: 6.
  • Page 7 Transport position Changing from working position to Securing the MULTITAST-System L for transport position transportation Safety Precaution! Mechanical stabilization: see supplement-A1 points 7.), 8c. - 8h.) Prevents the mowing unit from swinging during transportation. Changing from working position to transport position is only to be carried out on even, firm ground.
  • Page 8 Transport position Road Transport Parking the machine • Observe the regulations issued by your country's legislative • Details see chapter "Parking the machine" body. - When the implement ist parked, either remove the driveshaft • Travelling on public roads may only be undertaken as is described in the chapter "Transporting Position".
  • Page 9 Tuning the unit to the p.t.o. RPM Changing the V-belt pulleys Depending on the p.t.o. RPM the V-belt pulleys (A, B) are to be set up according to the table. Safety hints: see supplement-A1 points 1.) 3.) 8i.) Ø (mm) Ø...
  • Page 10: Mowing

    Field operation Mowing - Briefly switch hydraulic control unit (ST) to "lower" to activate - Mowing drums in horizontal position. the lifting cylinder (3). In doing that, the catch (12) is released and the unit can adapt - Lock lower link pin (2) free of play. itself to the uneven ground.
  • Page 11: Swath Makers (Cat 270 Plus Front Masch.nr

    Field operation Swath makers (CAT 270 Masch.Nr.: . . . - 03690) plus front Swath makers (CAT 310 Masch.Nr.: . . . - 01390) plus front Adjustment of both swath makers Leading swath disc Distance between mowing plate and swath disc "10-15 mm ". - Loosen nuts on the bracket (7) and adjust bracket.
  • Page 12 Field operation Swath makers (CAT 270 Masch.Nr.: . . . + 03691) plus front Swath makers (CAT 310 Masch.Nr.: . . . + 01391) plus front Adjustment of both swath makers Leading swath disc Distance between mowing plate and swath disc "10-15 mm ". Rear swath disc Adjustment "-10 mm".
  • Page 13: Maintenance

    Maintenance Maintenance Checking the mowing blade suspension - Check immediately after driving over a hard obstacle. Safety points - Normal check every 100 hours. • Turn engine off when adjustment, service and repair work is - Check more often when mowing on to be done.
  • Page 14: Lubrication Chart

    Schmierplan Plan de graissage Lubrication chart alle 20 Betriebsstunden (II) toutes les 20 heures de service after every 20 hours operation elke 20 uren alle 80 Betriebsstunden toutes les 80 heures de service F E T T (IV) after every 80 hours operation elke 80 uren Ölstand 2,5 - 3,5 cm Niveau d' huile 2,5 - 3,5 cm...
  • Page 15: Shorten Upper Link

    ANHANG - D ANNEXE - D SUPPLEMENT - D AANHANGSEL - D Oberlenker kürzen Raccourcir le 3 ème Topstang korter Shorten upper link point afstellen 1. Gerät an die Unterlenker des 1. Atteler la machine aux bras 1. Connect the unit to the lower Hubwerks ankuppeln.

Table of Contents