Rhythm Multi LAL/AP Mattress Quick Reference Guide
2. Therapy
1. Comfort
Mode
Controls
1. Comfort Controls - Choose from 1 of 10 selectable levels of air
pressure for support of the patient. Manufacturer recommends
using a hand check to select proper pressure setting for patient.
2. Therapy Mode – Pressing the MODE button will toggle between
static low air loss (STATIC), alternating pressure and pulsation
therapies
3. Alternating Cycle – When the Therapy Mode is in the ALTERNATE
setting, the CYCLE button provides a selectable alternating pressure
cycle between 3 and 95 minutes
4. Auto Firm –Firms up the mattress to allow for easier egress,
ingress or patient transfer.
3. Alternating
Cycle
Explanation of the Rhythm Multi controls
5. Keypad Lockout - Press and hold for 5 seconds to lock/unlock all
controls from patients or other non-caregivers
6. Alarm Reset – If the power failure alarm is triggered, this button will
silence and reset the alarm.
7. Main Power Button – after the main power switch is turned on (side
of pump) press and hold this button to move pump from Standby
Mode to Operate Mode which activates the airflow.
4. Auto
5. Keypad
Firm
Lockout
6. Alarm
7. Main Power
Reset
Button
Need help?
Do you have a question about the Multi LAL and is the answer not in the manual?
Questions and answers