Compass Calibration - SJRC F11 4K PRO Manual

Front
F/2.5 108° FOV
FUII HD Wi-Fi Cam
NOTICE: Fly in open areas, tall structures and large metal structures may
affect the accuracy of the onboard compass and GPS system.
Please search the GPS signal in the open areas.
2. Compass Calibration Part 2
— Keeping the drone level, pick up the aircraft
from the back and rotate your body in one
full circle (360°).
— Back lights will turn to solid blue.
3. Compass Calibration Part 3
— From the bottom, hold the aircraft vertically
and camera is facing to the ground, rotating
your body in one full circle(360°).
— Front lights will turn to solid white.
— App aircraft status: "Compass calibration
okay".
Step 5: Reset to factory Setting/Calibrate
Gyroscope
— Push the joysticks into the 11 & 1 o'clock
position.
— Lights rapid-blinking blue (back) and white
(front).
— App Drone Status: "Gyroscope is being
calibrated" "Gyroscope okay".
NOTICE: Make sure the aircraft on a flat
surface to calibrate gyroscope.
Step 6: GPS Searching (DO NOT use GPS
Mode indoor)
— Set the aircraft back down to level surface.
— Lights return to rapid-blinking blue (back)
and white (front) --This means the drone
is searching the GPS signal.
— This process can take a few minutes.
— App aircraft status: "Waiting for GPS signal".
Starting/Stopping motors
— Push the joysticks into 5 & 7 o'clock position.
— Motors automatically to start, push the left
joystick to take off the aircraft. (Starting the
motors before the aircraft taking off).
10