Table of Contents
Advertisement
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2019 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Battery and charger sold separately
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
19k
Advertisement
Table of Contents
Related Manuals for Atlas 56934
Summary of Contents for Atlas 56934
- Page 1 Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.
-
Page 2: Important Safety Instructions
Follow instructions for lubricating and changing accessories. Keep 7. avoid Unintentional Starting - handles dry, clean, and free from oil and grease. Do not carry appliance with finger on switch. Page 2 For technical questions, please call 1-888-866-5797. Item 56934... -
Page 3: Battery Charger Safety
If any abnormal any symptoms related to vibration (such as vibration occurs, stop use immediately. tingling, numbness, and white or blue fingers), seek medical advice as soon as possible. Item 56934 For technical questions, please call 1-888-866-5797. Page 3... - Page 4 14. Keep bystanders and other workers at Frequently monitor the Charger and least 50 feet from the work area. Battery Pack while charging. 15. Do not operate within 50 feet of electrical lines. Page 4 For technical questions, please call 1-888-866-5797. Item 56934...
-
Page 5: Extension Cords
Saw Chain Orientation. Cutters must face in direction of rotation. Specifications Battery Type Atlas Li-Ion 40V (57008) or 40/80V (57014) (sold separately) Charger Type 56993 or 56997 Atlas Li-ion (sold separately) 10″ Sprocket Nose Guide Bar Model: M1501039-1318TL 10″... - Page 6 Parts List and Diagram on page 14. Functions trigger lockout Handle Oil level Gauge trigger Battery (sold separately) Extension lock Oil Fill Saw chain Drive cover Drive cover chain lock nut Guide Bar Page 6 For technical questions, please call 1-888-866-5797. Item 56934...
- Page 7 9. Tension the Saw Chain following the steps edge of the Guide Bar. Fit the Drive Links in Tension Saw Chain on page 8. into the groove around the Guide Bar. Guide Bar groove Item 56934 For technical questions, please call 1-888-866-5797. Page 7...
- Page 8 Oil Level Gauge. Oil level 1. Remove Oil Fill Cap. Gauge 2. Using funnel, fill tank with bar and chain oil (sold separately). 3. Use clean cloth to remove excess oil. Page 8 For technical questions, please call 1-888-866-5797. Item 56934...
-
Page 9: Charging Battery Pack
2. There must not be objects, such as utility lines, The work area must not allow access by children nearby that will present a hazard while working. or pets to prevent distraction and injury. Item 56934 For technical questions, please call 1-888-866-5797. Page 9... -
Page 10: Operation
5. Cut lower branches first. 6. Do not force Pole Saw — l et Pole Saw do the work. 7. Remove the Pole Saw from a cut while it is running. trigger Page 10 For technical questions, please call 1-888-866-5797. Item 56934... - Page 11 Make fourth cut from top, severing branch. 9. When finished: a. Release Trigger and remove Battery Pack. b. Clean, then store according to cleaning, Maintenance and lubrication on page Item 56934 For technical questions, please call 1-888-866-5797. Page 11...
-
Page 12: Cleaning, Maintenance And Lubrication
Saw in a vertical position, remove all residual oil from the oil reservoir. 5. Li-Ion BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY. Do not short, incinerate or open battery. Page 12 For technical questions, please call 1-888-866-5797. Item 56934... -
Page 13: Replacing Drive Sprocket
Guide Bar is worn and needs to be replaced. Saw Chain. If there is a gap, the bar is normal. tilting Saw chain ruler chain ruler rail Worn Guide Bar Straight Guide Bar Item 56934 For technical questions, please call 1-888-866-5797. Page 13... -
Page 14: Please Read The Following Carefully
If product has no serial number, record month and year of purchase instead. note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 14 For technical questions, please call 1-888-866-5797. Item 56934... -
Page 15: Assembly Diagram
Diagram Item 56934 For technical questions, please call 1-888-866-5797. Page 15... - Page 16 limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the 56934 and is the answer not in the manual?
Questions and answers