Designplan CUBOID TILE Installation Instructions Manual

CUBOID TILE
12
INSTRUCTIONS PERTAINING TO RISK OF FIRE OR INJURY TO
PERSONS. READ ALL INSTRUCTIONS. IMPORTANT SAFETY
INSTRUCTIONS. SAVE THESE INSTRUCTIONS.
DANGER - RISK OF SHOCK - DISCONNECT POWER BEFORE
INSTALLATION! Please read all instructions before installation.
• Keep these instructions for future reference.
• Must be installed by a qualified electrician in accordance with national and
local standards. Designplan is not responsible for fixtures installed without
regard to these standards.
• Unauthorized alterations or tampering of product voids warranty.
•
• Suitable for INDOOR applications.
• DO NOT INSTALL INSULATION WITHIN 3 "
THE LUMINAIRE.

Maintenance

Scheduled maintenance must be carried out once a year on all lighting devices, regardless of appliance
class and type of use. It must include the following operations:
• Periodically clean fixtures to remove dirt from gratings and screw heads.
• Check tightness of screws on various parts of the device.
• Check that all cable glands and cables are intact and tight. Check that the glass or plastic lens is
intact, and replace it if broken or damaged.
• The internal components such as the ballast,
of oxidation or rust. Clear traces of rust and oxidation will indicate the presence of water inside the
device.
• In the case of damage, the components must be replaced by original components or spare parts.
I
•
•
B
sales@designplan.com
www.designplan.com
OF ANY PART OF
washers and screws must not show clear signs
79 Trenton Avenue, Frenchtown NJ 08825
21
.
L I .
IP
F: 908-996-7042
of 7