Advertisement
Extractor_UserManual_X-tractor 2/11/11 11:30 AM Page 1
C.R. LAURENCE Co. INC.
User's Manual
TLEX1 Extractor Pry Bar
Cat. No. TLEX1
Extractor Pry Bar
IMPORTANT: PLEASE READ BEFORE USING
The TAPER-LOc
Extractor Tool is made from a hardened alloy tool steel and may exert extreme
®
surface pressure while removing the Tapers. Always wear safety goggles and gloves when using
to prevent injury.
COPYRIGHT C.R. LAURENCE CO., INC. 2011
©
AVDB3002_02/11
Visit us at crlaurence.com for international toll free information
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for C.R. Laurence TAPER-LOC TLEX1
- Page 1 Extractor Tool is made from a hardened alloy tool steel and may exert extreme ® surface pressure while removing the Tapers. Always wear safety goggles and gloves when using to prevent injury. COPYRIGHT C.R. LAURENCE CO., INC. 2011 © AVDB3002_02/11 Visit us at crlaurence.com for international toll free information...
- Page 2 Extractor_UserManual_X-tractor 2/11/11 11:30 AM Page 2 The TLEX1 Extractor Pry Bar is a versitile tool designed primarily for the removal of broken TAPER-LOC Tapers. Because it is made ® of hardened alloy tool steel, the TLEX1 is suitable for any demolition tasks in confined areas.
- Page 3 Extractor_UserManual_X-tractor 2/11/11 11:30 AM Page 3 STEP 2: Using a rubber or plastic mallet, apply firm blows to the upper handle of the Extractor to break any seal that may have formed between the glass taper and the base shoe due to weathering. If you feel movement, stop and relocate the Extractor further under the taper and repeat the process.
Need help?
Do you have a question about the TAPER-LOC TLEX1 and is the answer not in the manual?
Questions and answers