Connecting To An Audio System Or Tv Component Video Input - Apex Digital AD-5131 User Manual

Apex ad-5131: user guide
Table of Contents

Advertisement

Connecting to an Audio System or TV Component Video Input

Best Picture
The Component Video input allows you to enjoy the sound and picture quality of the DVD video discs.
• How to setup the sound output
Step 1: After you have connected the input and output cables, turn on your TV and player.
Step 2: Press the Set-up button on your remote control.
Step 3: Select General Set-up by pressing the Enter button on your remote.
Step 4: Using the arrow keys, highlight the Audio out selection.
Step 5: Using the Right Arrow Key, highlight the Analog selection and select by pressing the
Enter Key on your remote control.
Step 6: Exit the menu by pressing the Set-up button.
Note: For S-Video set up, follow Steps 1-4 above. Highlight Set Video Output and S-Video.
• How to setup the video output
Step 1: After you have connected the input and output cables, turn
on your TV and player.
Step 2: Press the Set-up button on your remote control.
Step 3: Select General Set-up by
pressing the "Enter" button on
your remote.
Step 4: Using the arrow keys, highlight
the YUV Video selection.
NOTICE
• It will be helpful to also refer to the manual of the connected TV.
• Turn off the power and unplug both units before setting up any connections.
• Keep the DVD video player away from any tuner or radio to avoid any static or distorted sound during a broadcast.
• When connecting any disconnecting the DVD video player, be sure to turn off the amplifier to avoid any speaker damage.
• Due to the wide dynamic range of sound output of the DVD video player, adjust the volume of your receiver to a comfortably modist
listening level to avoid any speaker damage.
NOTICE (COMPONENT VIDEO OUTPUT)
Component input terminals when connected to selected TVs and monitors will produce a higher quality picture playback. Depending
on the selected TVs and monitors, the wording of the component input terminals may vary. (ie:R-Y, Y, B-Y, etc.) If there are any
fluctuations with the color played back adjust the TV or monitor to achieve the best audio and/or picture.
AD - 5131
1
2
To Cb
To Cr
VIDEO
VIDEO
OUT
OUT
To Cb VIDEO IN
To Cr VIDEO IN
To Y VIDEO IN
A
P
E
X
D
I
To Y
VIDEO
OUT
13
G
I
T A
L

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents