Basic Operation - Apex Digital AD-500A User Manual

Basic Operations
SYSTEM SETTING
According to the system of the TV to be connected, set the system of the unit to make it match the TV.
1. If the system of the TV is PAL:
Press SYSTEM and select PAL.
SYSTEM
The screen shows:
PAL
PAUSE
Press STEP.
• When playing pictures:
If the pictures of DVD and VCD are played, press STEP to make playback pause. The
unit enters step play status. Press STEP again, the unit plays a frame forward.
• When playing music CD:
Press STEP to make playback pause.
Press STEP again to resume playback.
OSD
When the unit is operated, the TV screen shows the operation functions and
information about the disc.
Press OSD to select.
VOLUME CONTROL
Press VOLUME on the TV or amplifier to adjust the volume or press VOLUME on the
remote control.
1. Press + to raise the volume.
2. Press - to lower the volume.
Note: Volume control will not be available on Digital Audio output (SPDIF/RAW or SPDIF/PCM).
AD-500A
Continued
2. If the system of the TV is NTSC:
Press SYSTEM and select NTSC.
SYSTEM
The screen shows:
NTSC
Note: most U.S. manufactured TV's are
NTSC
OSD
OSD
+
3. If the system of the TV is multi-
system:
Press SYSTEM and select AUTO.
The screen shows:
Note: SYSTEM button works only with DVD,
SUPER-VCD and VCD discs.
OFF
-
A P
SYSTEM
AUTO
OSD
STEP
VOLUME
REMOTE CONTROL RC-210
E X D I G I T A L
15