Advertisement
1
Unpack your tent and lay it out with the groundsheet
floor facing. Make sure the ground is flat and free of any
sharp objects. Find the door, and rotate to face desired
direction.
3
Locate the valves (approximately 50cm up on the
seams) You only need to pick one of the valves to inflate
the tent so make sure the others are screwed tight.
Please note each value has 3 positions: closed, inflation,
and fully open.
5
Once fully inflated, zip close the door and insert the
flexi door pole through the sleeve, complete this step
by using the metal pins to secure the pole in place. Now
peg-out the 2 guy ropes attached to the doorway.
pitching your tent
2
Keeping the tent fabric on top of the base, stretch
the groundsheet the form a perfect circle. Locate the
elastic rings and use the smaller pegs to fix your base
to the ground. Spread the ropes and use the sliders to
shorten each rope to approx. 1m in length.
4
Insert the pump nozzle into the valve and start pumping.
It' s vital that the pressure does not exceed 8-10PSI, you
should be carefully monitoring this by the gauge found
on the pump. 2/3 into the inflation process you will need
to manually push the tent roof upwards to help air flow
through the tubes evenly.
6
Take the larger ridged pegs and peg out the tent
webbing. Tension of the webbing should be equal and
not over tight. Once you have completed all webbing and
guy ropes you can adjust to suit.
Advertisement
