For your future reference please keep this manual in a safe place. Thank you for specifying a product from the Francis Searchlights range. All Francis products are designed to give complete customer satisfaction and are manufactured to the highest engineering standards in order to ensure optimum performance and service life.
◼ Never place anything on or cover the searchlight when in use. 3 – Technical Information This product has been designed to operate in accordance with the product specification. The M17 225w LED spotlight has the following features: ◼ All marine grade materials and fixings. ◼ Powder coated finish.
4 - Unpacking and Installation Instructions The following instructions should be read and fully understood prior to installing the equipment to ensure that the correct procedures are followed, and all safety precautions are observed. Note: If the equipment has been in storage for a considerable amount of time, it is advisable to conduct a routine maintenance check on all parts before installation.
6 – Operating Instructions This equipment is designed for use out of doors, in free air. Never place anything on, or cover, the spotlight when in use as this may present a hazard. The spotlight can be tilted 35 by pushing or pulling the underdeck handle. Before switching on the searchlight make sure to remove the plastic film sheet off the front protective cover.
Rear Handle In order to prolong the life and performance of your product, we recommend that you only specify Francis Searchlights spare parts. This will ensure that any warranties on your equipment will not be invalidated. When ordering spare parts please contact the Sales Department at Francis Searchlights Limited.
Need help?
Do you have a question about the M17 and is the answer not in the manual?
Questions and answers