Download Print this page

Rompa 22956 Manual

Table of Contents

Download this manual

1. Product Name

Amplifier

22956

Likely to be as pictured above

Amplify bass notes for greater resonance and thus deeper tactile sensations through your

vibro-acoustic product. Connects to a mobile device or music system and to your ROMPA®

vibro-acoustic product (both to be purchased separately).

 Amplifier

 IEC lead (kettle lead) with a plug appropriate to the country of our customer

6. Snoezelen® Stimulations

 Sound

Table of Contents

Do you have a question about the 22956 and is the answer not in the manual?

Page 1 Likely to be as pictured above 4. Brief Description Amplify bass notes for greater resonance and thus deeper tactile sensations through your vibro-acoustic product. Connects to a mobile device or music system and to your ROMPA® vibro-acoustic product (both to be purchased separately). 5. Contents ...
Page 2 7. Best Use Connect to a mobile device or music system and to your ROMPA® vibro-acoustic product (both to be purchased separately) to amplify the sound produced by the music input. 8. Compatible ROMPA® Products Please see www.rompa.com for our range of vibro-acoustic products.
Page 3 Connect the amplifier to your vibro-acoustic device: Use the 6.3mm SPEAKER OUTPUT sockets (LEFT and RIGHT) for connecting the cables from products such as ROMPA® Musical Water Beds When connecting these cables, make sure the large dial on the right hand side of the front of the Amplifier is set to AUX 2.
Page 4  If the power indicator light does not light up, check the 10 Amp fuse in the UK plug. Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received –...