Advertisement
Available languages
Available languages
OPERATING MANUAL | Air Conditioner Nanyo 35AA
F | MAINTENANCE
Always unplug the air conditioner from the mains before cleaning. To maximize the
efficiency of the air conditioner clean regularly.
Cleaning the housing
Use a soft, damp cloth to wipe the body clean.
Never use aggressive chemicals, gasoline, detergents, chemically treated cloths, or other
cleansing solutions. These all could possibly hurt the cabinet.
Cleaning the filter
Use a vacuum cleaner or tap the filter lightly to remove loose dust and dirt from the filters
and then rinse thoroughly under running water (no hotter than 40°C).
Dry thoroughly before replacing.
Notice! Never operate the unit without the filters.
End of season storage (Fig. 24)
Drain any water in the unit before completely operating the unit on ventilation only
mode for a few hours, to thoroughly dry the inside.
Clean or change the filter
Unplug and store the power cord as shown
Cover the cord storage
Replace in the original carton or cover for storage.
G | FAULT CHECK LIST
The air conditioner does not run.
Is the air conditioner plugged in?
Is there a power failure?
Is the comp / 'full water' indicator flashing?
Is the room temperature below the set temperature?
The machine seems to do little.
Is there direct sunshine? (Please put down the curtain.)
Are too many windows or doors open?
Are there too many people in the room?
Is there something in the room producing lots of heat?
34
Advertisement
