Advertisement
Please read all details stated before initial use:
1. INSTALLATION PROCEDURE
DO NOT alter or modify the electronic ballast in any way. Not only may it damage the unit, it
will void the warranty.
The rated power of the lamp must match the rated power of this electronic ballast.
These ballasts off er our exclusive Smart Volt™ feature – They are "smart" ballasts — They
will operate on either 120 or 240 volt power by simply plugging in the appropriate power cord.
There is no further modifi cation necessary. It comes with a 120 volt power cord. If you wish to run
this ballast on 240 volt, you must purchase the 240 volt power cord separately (part #903082 or
#903084).
2. SPECIFICATIONS
Rated voltage range: 120-240 Volts
Power source frequency: 50/60Hz
Power Factor (cosø): > 0.99
Total Harmonic Distortion: (THD): < 10.0%
3. NOTES
The Galaxy™ Electronic Ballasts will operate with Metal Halide lamps and High Pressure
Sodium lamps that are rated at the proper wattage.
This unit off ers short-circuit and power fl uctuation protection.
The Digital Fusion™ needs to be actively air-cooled with a fan.
RETURNING UNITS
Please contact your retail store for returns.
See back page for important warranty information
Connect appropriate
AC power plug here
AC INPUT 120 (included) OR 240V (purchase separately)
OUTPUT TO HPS/MH LAMP
Connect "Sun System" lamp cord
with male plug to female
receptacle on ballast
Ambient Temperature: 50˚F to 120˚F
Crest Factor: < 1.5
Acoustic Resonance: none
Advertisement
