Mouse Installation - Natec Tetra User Manual

PRODUCT FEATURES:
• Precise Blue Sense sensor
• Auto-speed function (800~2400DPI)
INSERTING THE BATTERIES:
• Remove the battery compartment cover on the bottom case of the mouse
• Fit in a pair of AA batteries accordingly to the diagram indicated in the battery cabinet
• Close the battery compartment cover properly
• If used batteries will discharge they need to be replaced by the new ones according to above instructions. Worn-out
batteries need to be diposed properly

MOUSE INSTALLATION:

• Turn on the computer
• Connect the receiver to free USB port on PC
• Make sure the Power on-off switch on the bottom of the mouse is ON
• The mouse will be detected and automatically installed by operating system
• The mouse should be ready for use
Note: The mouse includes software that allows you to set up advanced features, if you want to use these features, you
need to download and install the software from our website www.natec-zone.com. Open the installation folder and
then double-click the setup.exe file. Follow the installation instructions.
• The unit offers power saving management. After switching to hibernation (sleep) mode click any button of the
mouse to wake it up.
• Power on/off: There is a Power on/off switch designed to save the batteries power while non-usage of
a longer period.
SWITCHING SCROLL MODE:
• Standard scroll mode – when switched to the normal speed mode, the wheel can scroll at normal speed and with a
feeling of graduations.
• Hyper speed scroll mode – when switched to the hyper speed mode, the wheel can scroll at hyper speed, enabling
users to browse very fast.
• Ergonomic design
• Up to 10m working range
2x AA batteries
EN PL CZ SK
• Hyper-fast scroll
Battery compartment
cover