Advertisement
IR Remote
Operation
1
Turn on the LED Light by pushing the ON button on the
remote control
Select the desired color of the desired effect by pushing
2
the corresponding button on the remote control
3
Set the desired brightness using the buttons to
increase/decrease the intensity of color
4
Push the OFF button to turn off the LED Light
NOTE 1: In order to use the remote control, power to the light
fixture must be on.
NOTE 2: You can still control your light fixture by an
associated light switch, the LED Bulb will turn on again into
the last used color or mode.
Changing the remote control battery:
The battery for the remote control has already been installed.
Remove the battery pull tab to operate.
The battery compartment is located on the narrow side of
1
the remote control
Remove the empty battery and insert a 3V battery, type
2
CR2025, with the positive terminal pointing upwards
Place the battery compartment back in the remote control
3
so it locks in place
Advertisement
