Subscribe to Our Youtube Channel
Related Manuals for Fulbat LiFeP04
Summary of Contents for Fulbat LiFeP04
- Page 1 LITHIUM ION STARTER BATTERY 14-17 18-21 10-13 22-25 Release 2020-03 FULBAT - www.fulbat.com...
- Page 2 Always remove the battery from the vehicle before charging separately. • Charge the battery with a lower current than the MAX Charging Current. • After charging, leave the battery for 1 to 2 hours before checking the voltage. If the • FULBAT - www.fulbat.com...
- Page 3 For instance, When used under 0°C, it should be preheated for 1~2minutes by turning on the headlamp, and then the vehicle can be started. In this way, a better starting performance can be achieved and a longer battery service life will be maintained. FULBAT - www.fulbat.com...
- Page 4 If the battery stands by any period of time, check the voltage in case lower12.8 volts, • charge the battery(see charging section). Keep the connecting poles clean and securely fastened. • The battery is factory sealed and requires no topping up of any fluid. Never attempt • to open the battery. FULBAT - www.fulbat.com...
- Page 5 Do not allow discharge below 12.8V(resting voltage). • Do not allow charge voltage in excess of 14.8V. • OTHERS FULBAT shall not be liable for any unforeseen events arising out of the operation of • the foregoing instructions. FULBAT - www.fulbat.com...
Need help?
Do you have a question about the LiFeP04 and is the answer not in the manual?
Questions and answers