Table Of Contents - Trodat DRYTEQ SET Operating Manual

EN
Dryteq set BA_EN_1.0 (06/2019)
ENGLISH
Translated operating manual
Trodat GmbH
Linzer Straße 156
A - 4600 Wels
AUSTRIA
Tel.: +43-(0)7242-239-0
info@trodat.net
www.dryteq.com
Technical changes and errors reserved.
Trodat GmbH reserves the right to change
any product described herein without prior notice.
© Copyright
This documentation with all drawings is
the intellectual property of Trodat GmbH.
All documentation is provided to the user for
personal use only. Without written permission
from Trodat GmbH, this documentation may
not be reproduced or made accessible to third
parties. Any infringement will be prosecuted.
Content
1 General information
1.1 Information about this manual
1.2 Storage of the manual
1.3 Supplementary documentation
1.4 Key to symbols
1.5 Liability and warranty
2 Product description
2.1 Scope of delivery and device parts
3 Safety
3.1 Proper use
3.2 Improper use
3.3 Safety notes
3.3.1 General safety notes
3.3.2 UV curing unit
3.3.3 Stamp
3.3.4 Ink cartridge
4 Technical data
Initial start up
5.1 Check the device and
delivered accessories
5.2 Prior to start up
5.2.1 Charge the battery
5.2.2 Insert the ink cartridge
6 Operating instructions
6.1 Stamp impressions up to 20 x 20 mm
6.2 Stamp impressions from 20 x 20 mm
up to 20 x 60 mm
6.3 Limits of use
Cleaning
Troubleshooting
Disposal
2
EN
EN
4
4
4
4
4
5
6
6
7
7
7
7
7
7
9
10
11
11
11
11
12
13
14
14
15
15
16
17
19
3
EN