Do you have a question about the SYK-608 and is the answer not in the manual?
Questions and answers
Norman
May 25, 2025
Why does my oxygen concentrator turn on but barely puts out any air?
1 comments:
Mr. Anderson
May 26, 2025
The OSITO SYK-608 oxygen concentrator may turn on but barely put out any air due to a bent or blocked output hose, a dirty or blocked inlet window filter cotton, a loose humidification cup, or an internal failure. Check and straighten the output hose, replace the dirty filter cotton after turning off the power, ensure the humidification cup is properly installed, and if the issue persists, contact the distributor or manufacturer.
This answer is automatically generated
Barbara James
May 8, 2025
The manual says there is a silencer if not inserted correctly the unit will be noisy. Where is the silencer
1 comments:
Mr. Anderson
May 19, 2025
The exact location of the silencer on the OSITO SYK-608 is not specified in the provided information. However, if the device makes a loud noise, it may indicate that the silencer is not installed correctly and needs to be reinstalled after disassembly.
This answer is automatically generated
Carol Lincoln
May 4, 2025
how many hours will the concentrator work for without replacing
1 comments:
Mr. Anderson
May 17, 2025
The OSITO SYK-608 oxygen concentrator displays the words “Clean Filter” for 1 hour when the filter needs replacement, but the exact number of operating hours before replacement is needed is not specified. Therefore, the replacement time depends on filter condition, not a fixed number of hours.
This answer is automatically generated
Carol Lincoln
May 4, 2025
how do i change the filter
1 comments:
Mr. Anderson
May 17, 2025
To change the filter on the OSITO SYK-608:
1. Turn off the oxygen concentrator and unplug it from the power supply. 2. Locate the filter cotton behind the main machine. 3. Remove the old filter cotton. 4. Insert the new filter cotton in its place. 5. Ensure it is properly positioned. 6. Do not disassemble the machine to access internal parts.
Replace the filter cotton in time, especially if clogged with dirt, as it affects oxygen production. The “Clean Filter” message will display for 1 hour as a reminder.
This answer is automatically generated
HaLee Melgoza Julia Melgoza
March 29, 2025
Osito concentrator has Anion button, what does that Anion button do ???
1 comments:
Mr. Anderson
March 29, 2025
The Anion button on the OSITO SYK-608 concentrator activates and deactivates the negative ion function.
This answer is automatically generated
Sandra Lumley
February 3, 2025
Do you have filters for SYK-608. If not, do you know where I can find them. I **** in need of them and it is critical.
1 comments:
Mr. Anderson
February 10, 2025
Yes, OSITO offers filters for the SYK-608 model. The document mentions "OSITO Filters for Oxygen Concentrator SYK-608 & AST-606" and states that one pack contains two filters for AST-606 and SYK-608 oxygen concentrators.
This answer is automatically generated
Mark Ludwig
August 8, 2025
There are no pictures to show how to install the filter. There is a white hard cap but I don’t see how air would flow through it. Is that the filter?
Or is it just the small white soft sponge?
Why is this not shown in the manual???
Jeff Moore
June 21, 2025
Unit was beeping while running. It was turned off before screen was viewed. What was the beeping for?
Sandy Tamayo
February 25, 2025
oxygen concentrator with your brand wont work. im from.the Philippines visayas area where can i ask for help
Summary of Contents for OSITO SYK-608
Page 1
Full Intelligent Home Oxygen Concentrator Household Shenzhen OSTO Technology Co.,Ltd Thank you for your purchase of Full Intelligent Home Oxygen Concentrator.Please read this manual before use.Please save carefully after reading.The picture is for reference only, Add: Building 43,Longfeng Road,Xinsheng, the product is subject to the real object. Longgang,Shenzhen,China...
Contents Before installation Security Summary To prevent damage during the transportation process, the oxygen concentrator must be placed vertically and must not be inverted. Product Features If the power supply voltage is unstable and exceeds 220 ±10%, please install a voltage regulator Accessories before using.
Parts diagram and function introduction Intelligent control: LED screen, timing function, convenient to use, easy to operate. SYK-608 Humidification cup diagram Overheat protection: The pure oil-free compressor is equipped with a thermal protector. When the working temperature of the compressor is too high, it will automatically stop working to give better safety of the compressor and the whole machine.
Page 4
SYK-608 Exterior structure Preparation for oxygen-inhalation Connect the Earhook oxygen inhaler to the machine, and align the oxygen nozzle to the nostril (as below). Handle Connection diagram of Earhook oxygen inhaler and oxygen concentrator. Wearing method of earhook oxygen inhaler and nasal oxygen inhaler.
Page 5
(2) Oxygen-inhalation operation ①ON/OFF Connect the power cord plug to the socket, Turn on the power switch at the back of the machine (1) Preparation and the machine will beep a sound. Water filling nozzle ②Oxygen production Timing Total Flow L/min Under the power-on state, touch the "on/off"...
Remote control Component maintenance Maintenance of the humidification cup: In order to ensure the cleanness of the humidification cup, only can sue pure water or cold boiled water, and should be replaced every day. The Signal transmitting port humidification cup is recommended to be cleaned once a week. Maintenance of oxygen pipe and oxygen inhaler: It is recommended to clean once a week, and the use of the oxygen tube should not exceed half a year.
Troubleshooting Warranty Card 1) In order to protect the rights of consumers, our company can provide one-year warranty Common Number possible reason Solution troubleshooting service. We can give free maintenance services due to product quality problems in the warranty The power cord is not connected to Check if the plug on the power period.
Page 8
Concentrateur d'oxygène domestique entièrement intelligent Résumé Demande : Le produit est conçu conformément à la norme des appareils ménagers, qui (Générateur domestique, appareil portable de purification de l'air, massage respiratoire) peuvent être utilisés comme complément à la maison. Description en 5 points Principe de fonctionnement 1-5L réglable, débit 1 L pur 90% ±...
Page 9
Enfant. Soutien de la base Principale indication technique Fusible Numéro de modèle : SYK-608 interrupteur Vue de l'opération méthode du concentrateur d'oxygène : Adsorption à pression alternée Voie d'inhalation : Crochet auriculaire oxygène inhalation、Nasal inhalation d'oxygène Entrée : 130W...
Page 10
Vollständig intelligenter Sauerstoffkonzentrator für das Heim Zusammenfassung Bewerbung: Das Produkt ist nach dem Standard von Haushaltsgeräten konzipiert, die zur (Haushalts-Gennerator, Tragbare Luftreinigungsmaschine, Atemmassage) Nahrungsergänzung zu Hause verwendet werden können. 5-Punkte-Beschreibung Funktionsprinzip 1-5L einstellbar, Durchflussrate 1 L rein 90% ± 2%, Durchflussrate 2 L rein 78% ± 2%, ●...
Page 11
Berühren Sie leicht die Schaltfläche "Kindersicherung", die Kindersicherung öffnet sich, dann können andere Schaltflächen nicht funktionieren, bis Schließen der Kindersicherung. Unterstützer der Basis Wichtigste technische Indikation Sicherung Modellnummer: SYK-608 Netzschalter Sauerstoffkonzentrator-Methode: Druckwechsel-Adsorption Ansicht Betrieb Einatmende Weise: Ohrhaken Sauerstoff inhalation、Nasal Sauerstoff-Inhalation...
Page 12
Concentratore di ossigeno domestico completamente intelligente Sommario Applicazione: Il prodotto è progettato secondo lo standard degli elettrodomestici, che possono (Generatore domestico, Macchina portatile di purificazione dell'aria, massaggio del respiro) essere utilizzati per l'integrazione domestica. Descrizione in 5 punti Principio di funzionamento 1-5L regolabile, portata 1 L puro 90% ±...
Page 13
Chiudere il lucchetto per i bambini. Sostenitore della base Indicazione tecnica principale Fusibile Numero di modello: SYK-608 interruttore di alimentazione metodo del concentratore di ossigeno: Adsorbimento a pressione oscillante Vista del funzionamento Inalazione modo: Gancio auricolare ossigeno inhalation、Nasal inalazione di ossigeno...
Page 14
Concentrador de oxígeno casero totalmente inteligente Resumen Aplicación: El producto está diseñado de acuerdo con el estándar de los electrodomésticos, (Generador de la casa, máquina portátil de purificación de aire, masaje respiratorio) que pueden ser utilizados para la suplementación del hogar. Descripción de 5 puntos Principio de funcionamiento 1-5L ajustable, Tasa de flujo 1 L puro 90% ±...
Page 15
El apoyo de la base Indicación técnica principal Fusible Número de modelo: SYK-608 interruptor de encendido método del concentrador de oxígeno: Adsorción de oscilación de presión Vista de la operación Camino de la inhalación: Gancho para el oído oxígeno inhalation、Nasal inhalación de oxígeno...
Need help?
Do you have a question about the SYK-608 and is the answer not in the manual?
Questions and answers
Why does my oxygen concentrator turn on but barely puts out any air?
The OSITO SYK-608 oxygen concentrator may turn on but barely put out any air due to a bent or blocked output hose, a dirty or blocked inlet window filter cotton, a loose humidification cup, or an internal failure. Check and straighten the output hose, replace the dirty filter cotton after turning off the power, ensure the humidification cup is properly installed, and if the issue persists, contact the distributor or manufacturer.
This answer is automatically generated
The manual says there is a silencer if not inserted correctly the unit will be noisy. Where is the silencer
The exact location of the silencer on the OSITO SYK-608 is not specified in the provided information. However, if the device makes a loud noise, it may indicate that the silencer is not installed correctly and needs to be reinstalled after disassembly.
This answer is automatically generated
how many hours will the concentrator work for without replacing
The OSITO SYK-608 oxygen concentrator displays the words “Clean Filter” for 1 hour when the filter needs replacement, but the exact number of operating hours before replacement is needed is not specified. Therefore, the replacement time depends on filter condition, not a fixed number of hours.
This answer is automatically generated
how do i change the filter
To change the filter on the OSITO SYK-608:
1. Turn off the oxygen concentrator and unplug it from the power supply.
2. Locate the filter cotton behind the main machine.
3. Remove the old filter cotton.
4. Insert the new filter cotton in its place.
5. Ensure it is properly positioned.
6. Do not disassemble the machine to access internal parts.
Replace the filter cotton in time, especially if clogged with dirt, as it affects oxygen production. The “Clean Filter” message will display for 1 hour as a reminder.
This answer is automatically generated
Osito concentrator has Anion button, what does that Anion button do ???
The Anion button on the OSITO SYK-608 concentrator activates and deactivates the negative ion function.
This answer is automatically generated
Do you have filters for SYK-608. If not, do you know where I can find them. I **** in need of them and it is critical.
Yes, OSITO offers filters for the SYK-608 model. The document mentions "OSITO Filters for Oxygen Concentrator SYK-608 & AST-606" and states that one pack contains two filters for AST-606 and SYK-608 oxygen concentrators.
This answer is automatically generated
There are no pictures to show how to install the filter. There is a white hard cap but I don’t see how air would flow through it. Is that the filter? Or is it just the small white soft sponge? Why is this not shown in the manual???
Unit was beeping while running. It was turned off before screen was viewed. What was the beeping for?
oxygen concentrator with your brand wont work. im from.the Philippines visayas area where can i ask for help