Advertisement
Connect the Scart plug of the enclosed
cable with the AV Scart input of the play-
back unit.
Infrared signal control
There are two options for controlling AV source devices:
1. The devices can be directly controlled via the IR transmission window on the
transmitter (the IR transmission window of the transmitter must be aligned to the
IR reception eye for this).
2. The devices can be controlled via infrared signal line (the infrared signal line
must be attached for this).
34
Operating Instructions
English
Follow the operating instructions of the
appropriate equipment.
Commande directe de par transmitter:
Positionnez le transmitter de manière à
ce que l'écran de l'émetteur IR soit dans
la même direction que le récepteur IR
de l'appareil à commander.
Commandes avec les signaux infrarouges:
Collez à l'aide des pastilles autocollan-
tes les diodes émettrices devant l'œil
récepteur de l'appareil à commander.
Branchez la prise mâle de la commande
infrarouge sur la prise IR (3) du trans-
mitter.
The oval IR transmission window is on
the front side of the transmitter.
There may be no obstacles in the trans-
mission range.
Set the position of the IR reception eye
on the device to be controlled according
to appropriate operating instructions.
Leave the range of the IR reception eye
free so that the devices can still be con-
trolled directly via remote control.
The position of the IR receiver eye on
the equipment to be controlled should
be taken from the appropriate operating
instructions.
A maximum of 3 devices can be
connected.
55
Advertisement
Chapters
