Aluratek ABH05F Quick Start Manual

Bluetooth Wireless Stereo
Headphones
Quick Start Guide
Package Contents
Your order has been carefully packaged and inspected. The following accessories should be included in your package. Please
inspect the contents of the package to ensure that you have received all items and that nothing has been damaged. If you
discover a problem, please contact us immediately for assistance.
Product Highlights
Multifunction Button
Answer Call / End Call /
Play / Pause
3.5mm (AUX)
LINE IN Port
Button Operation
Last number redial: In standby status, press the
last number.
Battery Capacity status: When the headphones are connected to an iOS
device, the headphone battery power status is visible in the upper right corner.
Device Operation
Note: The pairing mode will last 10 minutes. ABH05F will power off automatically if no devices can be
connected within 10 minutes.
Pairing with an iPhone, smartphone or tablet:
The pairing procedure will vary depending on the actual device. Please refer to the
user guide of your device for detail instruction. The pairing procedures are as follows:
1. Make sure ABH05F is powered OFF.
2. To activate the headphone pairing mode, power on ABH05F, it will enter pairing
mode automatically. (Red and Blue LED will flash rapidly)
3. Activate your device's Bluetooth function and set your device to search for
Bluetooth devices. Select ABCTVKITH when it is found.
4. For transmitter with Bluetooth version 2.1, you will not need to input a code.
If you are prompted for PIN, please enter "0000".
5. If prompted by your device to connect, please select "Yes".
6. After connecting successfully, the blue LED will flash once every 10 seconds.
Note: Please make sure the audio output is set to Bluetooth for audio streaming from the device.
Button Operation
Volume Adjust: Press the
Play/Pause: Short press the
Previous: Long press the
the previous music track.
Next: Long press the
Volume Control
next music track.
Bluetooth
Answer Call: Short press the
Status LED
End call: Short press the
Micro USB
Charging Port
Reject call: Press and hold the
Microphone
ON / OFF
Device Operation
Charging the battery
button twice to redial the
The battery is not fully charged and it is highly recommended that you charge
ABH05F before you begin using it.
Note: Using ABH05F "out of the box" will not harm the device. You will experience reduced battery life
as the unit will not be fully charged.
Connect the larger USB end of the provided cable to your computer / power
adapter (not included). Connect the smaller micro USB end to the USB port of
ABH05F. Please charge the battery for a minimum of 3 hours. The red LED will be
on while charging. When charging is complete, the blue LED will turn ON.
Device Operation
3.5mm music line-in function
Connect the audio line-in 3.5mm cable to 3.5 audio jack for wired music.
1. Connect the 3.5 audio wire to the headphone and audio player.
2. You can adjust the volume from the connected audio player or mobile phone.
Note: Phone function cannot be used in this mode
model ABH05F
qsg Q10546 Copyright © 2020 Aluratek, Inc. All Rights Reserved.
USB Cable
or buttons to adjust the volume.
button to play and pause music.
button for 2 seconds to return to
button for 2 seconds to advance to the
button to answer phone calls.
button to end the phone call.
button for 2 seconds to reject a call.
3.5 mm Cable