Advertisement
LMA8 Mic/Line Preamplifier
ROSTEC LMA8
8-channel Professional Mic/Line Preamplifier
Programming of the push-button response time
The IMP and +48V push buttons on the front panel are tactile toggle switches. They can be programmed to 6 different
response times: 32 msec, 63 msec, 125 msec, 250 msec, 500 msec or 1 second
The unit is switched into programming mode by holding down the CH8 IMP switch while powering up. The response time
is selected by pressing the CH1 to CH6 IMP switches. The chosen setting is immediately saved into memory. No need to
do anything special.
The graphical representation illustrates the procedure.
1
Advertisement
Table of Contents
Related Manuals for ROSTEC LMA8
Summary of Contents for ROSTEC LMA8
- Page 1 LMA8 Mic/Line Preamplifier ROSTEC LMA8 8-channel Professional Mic/Line Preamplifier Programming of the push-button response time The IMP and +48V push buttons on the front panel are tactile toggle switches. They can be programmed to 6 different response times: 32 msec, 63 msec, 125 msec, 250 msec, 500 msec or 1 second The unit is switched into programming mode by holding down the CH8 IMP switch while powering up.
- Page 2 LMA8 Mic/Line Preamplifier Step 1: Turn the unit off Step 2: Hold down CH8 IMP switch while turning the unit on. Step 3: The 6k IMP LEDS on channels 1 to 6 will flash 3 times, indicating that the unit is in programming mode Step 4: Press the IMP switch on channels 1 to 6 to select the response time.
Need help?
Do you have a question about the LMA8 and is the answer not in the manual?
Questions and answers