Note: During the installation, ensure that you align the memory module to the slot and press down on both
ends until the latches are fully engaged with a click.
PCI-Express connector cable
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, do the following:
1. Remove these parts in order, if any:
• "Computer cover" on page 28
• "Optical drive" on page 28
• "Front bezel" on page 29
• "Drive bay assembly" on page 30
2. Disconnect the cable from the system board.
Removal steps
PCI-Express card
Prerequisite
Before you start, read Generic Safety and Compliance Notices, and print the following instructions.
For access, remove these parts in order, if any:
• "Computer cover" on page 28
38
M70t Gen 2 User Guide