How To Use The Memory Function - UBTC BSP-22 Instructions Manual

4 Press the START/STOP button to turn off the unit.
The unit will automatically turn off after two minutes
if it is not used in that time. Please rest for 30– 60
seconds before taking your next measurement.

How to use the memory function

• The unit stores the blood pressure and pulse rate in
the memory after completing each measurement. It
can automatically store 120 sets of measurement
values. The earliest record is deleted to save the
latest measurement value when there are more than
120 sets.
• The unit also calculates an average (AGV) reading
these are based on the last 3 measurements taken.
• To check the average results from other groups,
select the desired group first prior to activating the
«M»-button in the off position.