Logic BHS3 User Manual

BHS3
BT WIRELESS HEADSET
USER MANUAL I MANUAL DE USUARIO
Welcome
Thank you for purchasing this innovative Logic product. We invite you to read the
instructions contained in this user manual so you can configure and utilize all the
functions your new device has to offer. For additional information visit us at:
logicmobility.com.
General Information
The specifications in this manual are subject to change without prior notice.
Swagtek, Inc. reserves the final right to interpret the performance of this device.
While the utmost care was taken and the latest information compiled in the
production of this manual neither Logic, nor any other affiliated company,
assumes responsibility for any mistakes or errors that may be contained in this
document.
Screen captures, images, diagrams or representations presented in this manual
are for reference purposes. The actual screens or functions may vary due to
different software versions or other factors. Please refer to your device for the
correct details.
Charging Battery:
The bluetooth headset is powered by rechargeable Li-ion batteries. Please
use the USB cable provided with the headphone.
1- Insert USB cable into headphone and USB charging port.
2-The LED indicator will turn red. When fully charged the LED indicator will turn
off.
3- It takes about 4 hours for a full charge. Please insure you charge for at least
4 hours
Controls:
1- Power/Phone/Play/Pause Button
2- >>/V+ button: Next song and volume up
3- <</V- button: Previous song and volume down
4- Built in microphone
5- LED Indicator
6- USB charging port
7- 3.5mm headphone Jack
Pairing:
1- To enter pairing mode, press and hold the power button for 3 seconds
untill the red and blue LED blink alternatively.
2- Search on your pairing device for "BHS3" and select
3- Your headphone should now be paired with your device
5
3
2
1
4
6
7