Logic HS1 User Manual

HS1
HEADPHONE
USER MANUAL I MANUAL DE USUARIO
Welcome
Thank you for purchasing this innovative Logic product. We invite you to read
the instructions contained in this user manual so you can configure and utilize
all the functions your new device has to offer. For additional information visit us
at: logicmobility.com.
General Information
The specifications in this manual are subject to change without prior notice.
Swagtek, Inc. reserves the final right to interpret the performance of this
device. While the utmost care was taken and the latest information compiled
in the production of this manual neither Logic, nor any other affiliated company,
assumes responsibility for any mistakes or errors that may be contained in this
document.
Screen captures, images, diagrams or representations presented in this
manual are for reference purposes. The actual screens or functions may vary
due to different software versions or other factors. Please refer to your device
for the correct details.
Logic and the Logic logo are registered trademarks of Swagtek, Inc. Other
trademarks are the property of their respective owners.
Specifications:
• Impedance: 32 Ω
• Frequency response: 20-20,000 Hz
• Maximum input power: 100 mW
• Sensitivity: 105 + 4 dB
• Cable length: 1.2 m
• Connector: 3.5mm stereo jack
Direction:
Please plug your new HS1 headphones into your device.
You may adjust volume controls on the device. The HS1
comes with a built in microphone. We hope you enjoy our
new Logic HS1 headphone.