1. Manuals
  2. Brands
  3. HARDKERNEL Manuals
  4. Game Console
  5. ODROID-GO
  6. Building instructions

HARDKERNEL ODROID-GO Building Instructions

Hide thumbs
1
2
3
4
5
6
7
8
9
Table of Contents

Advertisement

Quick Links

Download this manual
2020/06/10 17:38
Building the ODROID-GO kit
This page shows how to assemble the ODROID-GO kit.
The enclosed parts in the ODROID-GO package
A. 1x ODROID-GO Board
B. 1x Front enclosure
C. 1x Back enclosure
D. 1x 2.4" LCD
E. 1x D-Pad Rubber
F. 1x A,B Button Pad Rubber
G. 2x Select Buttons Rubber
H. 1x 8 Ohm 0.5W Speaker
ODROID Wiki - http://wiki.odroid.com/
1/9
Building the ODROID-GO kit

Advertisement

Table of Contents
loading

Related Manuals for HARDKERNEL ODROID-GO

Summary of Contents for HARDKERNEL ODROID-GO

  • Page 1 2020/06/10 17:38 Building the ODROID-GO kit Building the ODROID-GO kit This page shows how to assemble the ODROID-GO kit. The enclosed parts in the ODROID-GO package A. 1x ODROID-GO Board B. 1x Front enclosure C. 1x Back enclosure D. 1x 2.4“ LCD E.

  • Page 2: Lcd Window

    M. 1x Micro USB Cable N. 1x 1200mAh Li-ion battery Build instruction This section shows you how you can build the ODROID-GO. Please carefully follow the instruction below. LCD window First, in order to protect LCD screen, you have to place the enclosed plastic screen cover on the front enclosure.
  • Page 3 Refer to this video before assembling: Youtube - ODROID-GO LCD Assembly If you press the edges of the LCD panel too hard with your fingers while inserting the LCD, it may damage the glass as shown below pictures.

  • Page 4: Play Buttons

    Main board Next is the main part of the assembling instructions. Please carefully put the ODROID-GO board in the front enclosure and connect the LCD cable to the board. You have to fully insert the LCD FPC cable into the connector. Otherwise, the display will not work from time to time.

  • Page 5: Power Key

    Building the ODROID-GO kit You also need to connect the battery pack and speaker module to the ODROID-GO board. It would be a good idea to wrap the speaker wires as shown in the picture, otherwise, it would be difficult to close the back enclosure.
  • Page 6 ODROID-GO before closing the back enclosure. Testing before playing You can turn the device on or off with the power switch on the right side of the ODROID-GO. Please softly slide the key up to turn on or down to turn off.

  • Page 7: Memory Card

    Since the ODROID-GO loads the games from the memory card (Micro SD type), you must insert a memory card in the card slot on the bottom of the ODROID-GO. In order to copy the game images to the memory card, please visit the link.

  • Page 8: Warning And Caution

    If you press the edges of the LCD panel too hard with your fingers while inserting the LCD, it may damage the TFT glass as shown below pictures. Yet Another ODROID-GO Build Tutorial This is a photo driven build tutorial for the ODROID-GO kit with a bunch of little tips along the way. http://wiki.odroid.com/ Printed on 2020/06/10 17:38...
  • Page 9 2020/06/10 17:38 Building the ODROID-GO kit Written by forum user @vbrusca. Yet Another ODROID-GO Build Tutorial From: http://wiki.odroid.com/ - ODROID Wiki Permanent link: http://wiki.odroid.com/odroid_go/go_assembling Last update: 2019/04/02 00:32 ODROID Wiki - http://wiki.odroid.com/...

Table of Contents