General; Strainer Marking - Modentic Y-Type Installation, Operation & Maintenance Manual

General:

1. Strainers are devices for mechanically removing solids from flowing liquids or gases by
means of a perforated or wire mesh straining element. They are used in pipelines to
protect equipment such as pumps, meters, manual and control metal seated valves,
steam traps and regulators.
2. Always use Modentic recommended spare parts for maintenance and replacement.
3.

Strainer Marking:

All the marking information should be cast on the body, or on a metal plate which is
spot-welded to the body.
PED VALVES MARKING
MARK
A TYPE NO.
B YEAR OF MANUFACTURE
C MATERIAL
D SIZE
E PRESSURE
F CE. MARK
G TEMPERATURE
TUV RHEINLAND
H
/ BERLIN-BRANDENBURG
HEAT NO. CAST ON THE BODY AND CAP
MD LOGO CAST ON THE BODY OR
ON THE NAMEPLATE
PE D(SEP) VALVES MARKING UNDER DN25
MARK
A
B
C
HE AT NO. CAST ON THE BODY AND CAP MD
LO GO CAST ON THE BODY OR ON THE
NA MEPLATE
DESCRIPTION
DESCRIPTION
SIZE
MATERIAL
PRESSURE
A
C
X-XXX
E
CF8M
G
PN40
XXXXXXXX
A
B
C
B
D
XXX
F
DN32
H
0038
X -XXX
C F8M
P N40