Samsung SDP-6500DX Quick Start Manual

SDP-6500DX
B A S I C
The Samsung SDP-6500DX provides control of the basic operations on the front panel of the Digital Presenter. Please note that you
can also access these features via the Remote Control or the PS/2 Mouse by right-clicking on the mouse button to access the menu.
Advanced features are found on both the remote and menu commands via the mouse.
Use the Rotate button to electronically
"flip" your portrait documents for sharper
auto focus adjustment at any time. Manual
results and better display. Place the docu-
focus is available on the remote or menu
ment on the surface in a landscape mode.
via the mouse.
Left-hand users place the top of the docu-
Tip
ment towards the left. Right-hand users
command for extremely accurate manual
place the top towards the right. Press the
focus control...especially good for 3-dimen-
Rotate button once to flip the document
sional subjects when at maximum zoom.
from left to right (for left-handed users) or
three times (for right-handed users).
Turn on the main power switch of the
document camera. After the boot-up
screen, the presenter will perform an
automatic white balance or "Color
Adjustment."
Tip
: Make sure there is no subject matter
on the display surface to affect white bal-
ance. Printed text on white paper is OK.
The Aperture button will allow you to
switch between Text and Image settings.
(Zoom In) settings to reduce or enlarge the
In the Text mode, adjust the Iris buttons
image size. Auto focus will occur after
to set the desired brightness for text
zooming has stopped.
documents. In the Image mode, adjust the
Tip
Iris to obtain the best results for image-
subject during auto focus. If the subject is
based materials such as photographs.
blurry, press the AF button to re-focus.
Tip : Once you've adjusted your settings for
Text and Image, they are automatically
stored in memory, allowing you to quickly
switch between a wide variety of materials
simply by pressing the Aperture button.
Quick Start Guide
O P E R A T I O N S
Pressing the AF button will activate an The Iris buttons (brightness control)
are used to lighten (+) or darken (-) the
overall image for the desired result.
: Use the mouse and the built-in menu
Press the Wide (Zoom Out) or Tele Use the Freeze button to "hold" any
image on screen while you change your
subject or to Freeze an object in any
position.
Tip
: Make sure you're not moving the : The Freeze button is used to freeze
a live image or divided image in order to
activate the Draw menu command for
annotation.
www.samsung
To switch between input sources, such
as a computer, connect it to the Input 1 or 2
connections on the back of the Samsung
Digital Presenter. By pressing the
INT/EXT button, you can cycle
between the presenter and any
two sources.
Upper Lamps automatically turn on.
To change lighting options, press the LAMP
button to cycle through the sequence (Top
Lights / Light box / No Lights)
Tip
: It will take approximately 1-2
seconds after the Lamps Off setting
before the top lamps will light.
presenter
.com
Press the AWC button to activate an
automatic color adjustment at any time.
Tip
: Make sure there is no subject mat-
ter on the display surface to affect white
balance. Printed text on white paper is OK.