Table of Contents
Advertisement
Quick Links
R-TEC Smart Controls - Surface Mount Wall Switch
FEATURES - 5 CHANNEL
2-Way RF
Multi Channel
Communication
© 2021 Rowley
RTMWSR5C
Surface Mount Wall Switch
individual window treatment, room and home control.
Available in 5 channel model, wall switches are compatible with all ARC motors.
Flush wall switches feature a contemporary design and a wirefree deployment,
making them retrofit ready for any location. They can be mounted on top of any
surface as either a fixed mount or magnetic mount. Its slim profile eliminates the
need for any holes to be cut in walls.
Retrofit
Selectable
Ready
Company. All rights reserved. R-TEC Automation
®
in flush mount provides a sensible control option for
Group
Control
is a registered trademark of the Rowley
®
1
2
3
4
5
STOP
Optionally Functions as
a Handheld Remote
Company, LLC.
®
1
Advertisement
Table of Contents
Related Manuals for Rowley R-Tec Automation RTMWSR5C
Summary of Contents for Rowley R-Tec Automation RTMWSR5C
- Page 1 FEATURES - 5 CHANNEL STOP 2-Way RF Multi Channel Retrofit Group Optionally Functions as Communication Selectable Ready Control a Handheld Remote © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®...
-
Page 2: Table Of Contents
Adjusting Lower Limit Favorite Positioning Set a Favorite Position Send Window Treatment to Favorite Position Delete Favorite Position Troubleshooting © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 3: Technical Data / Pack Contents
Fixed Wall Clip Pan Head Screws (2) Phillips Head Screws (2) Anchors (2) 3 V - CR2450 Battery Instruction Manual © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 4: Safety
Keep away from children. Do no dispose of in general waste. Please recycle batteries and damaged electrical products appropriately. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 5: Installation
Install CR2430 battery with positive (+) side separating switch covers with screwdriver. facing up. Snap covers back together. Snap covers back together. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 6: Magnetic Wall Clip
Use supplied fasteners and anchors as needed to attach the base and cover. Switch is secured unless the Cover is removed. Safely dispose of the unused Magnetic Wall Clip. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 7: Functional Overview
When a channel is selected, the blue LED will stay illuminated for four seconds and then go out. The channel remains active. Programming and operation of the window treatment(s) on the channel can proceed without reselecting the channels. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ®... -
Page 8: Programming
Refer to P1 LOCATIONS below for specific devices. Motor Response Motor Response P1 LOCATIONS Approx. Approx. Drapery Large Tubular © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 9: Using A Pre-Existing Controller
Press P2. Press on new switch. Motor Response Motor Response Motor Response © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 10: Initial Set Up
For FT Motors, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto lock mechanism when the shade is raised. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ®... -
Page 11: Locking The Limit Setting Function
The locked setting will prevent any multi-button functions. These include reversing direction before setting limits, limit setting and toggling between tilt and roller modes. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ®... -
Page 12: Adjusting Limits
For FT Motors, the bottom limit should be set ~ 1.38 in. (35mm) below the Ultra-Lock to disengage the auto lock mechanism when the shade is raised. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ®... -
Page 13: Favorite Positioning
Press STOP on controller. Press STOP on controller. Motor Response Motor Response Motor Response Approx. Approx. Approx. © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®... -
Page 14: Troubleshooting
Any Questions? Contact our R-TEC Automation in-house experts at 866.985.3423. Email us at RTECAutomation@RowleyCompany.com. ® © 2021 Rowley Company. All rights reserved. R-TEC Automation is a registered trademark of the Rowley Company, LLC. ® ® ®...
Need help?
Do you have a question about the R-Tec Automation RTMWSR5C and is the answer not in the manual?
Questions and answers